TheBackShed.com

Forum Index : Microcontroller and PC projects : ColorMax Pre-order

Page 8 of 8

Author

Message

Geoffg

Guru

Joined: 06/06/2011
Location: Australia
Posts: 3194

Posted: 01:56pm 06 Dec 2012

Copy link to clipboard

Print this post

4.0 of MMBasic had an issue with some monitors. Try 4.1 which fixed that particular problem.

BTW, I have just got my CGCOLORMAX1 and Rob has done a fantastic job on it. MMBasic runs perfectly (I tested it) and I plan to test all future versions on it before release. Fully assembled and at that great price it is the perfect alternative to building a kit. What intrigued me most is that with its prototyping area it makes a great controller. If you don't need the colour output you can turn it off and you have a fast controller with a lot of I/O.

Top of my list now is to add support for RS485 on the CGCOLORMAX1.

With Mick's excellent adapter board for the UBW32 we now have have a good range from the build-it-yourself kit through to a fully assembled board, each with their own set of advantages.

GeoffEdited by Geoffg 2012-12-08

Geoff Graham - http://geoffg.net

Lopezjm2001

Regular Member

Joined: 08/07/2012
Location: Australia
Posts: 42

Posted: 07:35pm 06 Dec 2012

Copy link to clipboard

Print this post

Hi Geoff,

I have flashed the latest version of MMbasic V4.1 and it fixed my VGA problem.
If John Harding builds your latest version of MMbasic to include his CAN commands will you include them in future versions for the Colourmax1? I will be building a CAN port onto the prototype area very soon, just need to find out which pin numbers to use for TX and RX and which ones (if the pins are exposed or not) are on my new Colourmax1.

Thanks,

John

Edited by Lopezjm2001 2012-12-08

Lopez

Geoffg

Guru

Joined: 06/06/2011
Location: Australia
Posts: 3194

Posted: 04:44pm 07 Dec 2012

Copy link to clipboard

Print this post

Hi John,

Yes, I hope to now put CAN into 4.2. See my post in your other thread.

Geoff

Geoff Graham - http://geoffg.net

jman

Guru

Joined: 12/06/2011
Location: New Zealand
Posts: 711

Posted: 07:06pm 08 Dec 2012

Copy link to clipboard

Print this post

I did mine a little different
As I only had 220K smd resistors on hand I placed two on top of each other
They measure 108.3K and now the PSU functions perfectly

John

shoebuckle
Senior Member

Joined: 21/01/2012
Location: Australia
Posts: 189

Posted: 06:42pm 16 Dec 2012

Copy link to clipboard

Print this post

donmck said
9V 2.2A Power Supply Adapter (5.5 x 2.1mm Connector)

http://dx.com/p/9v-2-2a-power-supply-adapter-5-5-x-2-1mm-con nector-125358?item=26

Hard to go wrong with these at $6.82AUD inc postage

Don...

Remember these 9v power supplies? I ordered one on 17th October and it arrived today, so if yours hasn't come yet, it may still!!

Happy Christmas
Hugh

shoebuckle
Senior Member

Joined: 21/01/2012
Location: Australia
Posts: 189

Posted: 06:45pm 16 Dec 2012

Copy link to clipboard

Print this post

Sorry, somehow I duplicated this post.

HughEdited by shoebuckle 2012-12-18

CircuitGizmos

Guru

Joined: 08/09/2011
Location: United States
Posts: 1425

Posted: 11:44am 04 Jan 2013

Copy link to clipboard

Print this post

CircuitGizmos said
I'm offering a pre-order of the CircuitGizmos CGCOLORMAX1 (ColorMax) for a $5 discount for TBS readers.

The regular price for the fully assembled board will be 54.99 and for the duration of the pre-order it will be $49.99.

Observant readers might have noted that the price for the CGCOLORMAX1 has remained stuck at $49.99.

Part of that was because, um, I forgot to bump the price up after the pre-order period. When I did notice, I just decided to leave it at $49.99. Since I would be changing the design a bit for revision two, I may as well just leave the discount in place until the rev 1 boards are gone.

-Robert

Micromites and Maximites! - Beginning Maximite

Page 8 of 8

Print this page

To reply to this topic, you need to log in.