 Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me. |
Forum Index : Microcontroller and PC projects : PicoMite V6.00.00 release candidates - all versions
  Page 6 of 25   |
|||||
| Author | Message | ||||
| JanVolk Senior Member  Joined: 28/01/2023 Location: NetherlandsPosts: 145 |
If you manually enter the option list for the RP2040 PicoMite MMBasic Version 6.00.00RC4 and RC5, the USB connection will be disrupted for every option system and option SD card with the pullup message: COM cannot find xx port. (TeraTerm Version 5.2, TeraTerm Pro version 2.3) The connection must then be manually restored in Setup/Serial port. The RAM memory was not cleared properly after the update. > memory Program: 0K ( 0%) Program (0 lines) 132K (100%) Free Saved Variables: 16K (100%) Free RAM: 0K ( 0%) 0 Variables 74K (46%) General 86K (54%) Free > new > memory Program: 0K ( 0%) Program (0 lines) 132K (100%) Free Saved Variables: 16K (100%) Free RAM: 0K ( 0%) 0 Variables 0K ( 0%) General 160K (100%) Free Jan. Edited 2024-10-06 07:23 by JanVolk |
||||
homa Guru  Joined: 05/11/2021 Location: GermanyPosts: 351 |
Thx, but ... Edited 2024-10-07 01:14 by homa Footnote added 2024-10-07 01:15 by homa I miss a strikethrough e.g. [D]---[/D] |
||||
| matherp Guru Joined: 11/12/2012 Location: United KingdomPosts: 9129 |
No: Only OPTION LCDPANEL CONSOLE fnt or OPTION RESOLUTION or OPTION RESET sets the default font Edited 2024-10-07 01:17 by matherp |
||||
electricat Senior Member Joined: 30/11/2020 Location: LithuaniaPosts: 161 |
PicoMiteVGAUSBRP2040V6.00.00RC4 I did not updated RC4 to RC5 for a moment, but nobody indicated, so it might still be there. In local editor F3:Find work SHIFT+F3 (repeat find) does not work. But Ctrl+G does work! |
||||
| matherp Guru Joined: 11/12/2012 Location: United KingdomPosts: 9129 |
You don't say what keyboard. Local USB, Windows PC, Linux PC, Mac PC? |
||||
| electricat Senior Member Joined: 30/11/2020 Location: LithuaniaPosts: 161 |
Firmware is PicoMiteVGAUSBRP2040V6.00.00RC4 I said "local" but I better had to say it`s PICOMITEVGA "built-in full screen editor" (as described in picomite user manual) Picomite is powered from stable external source, USB keyboard is conected to pico`s USB. So there is no Windows or linux or mac at all. Just PicomiteVGA, monitor and keyboard. While editing all works as it should. Marking, copying/cuting/pasting etc. On pressing F3 (inside built-in editor) and entering search text - it finds it. But when trying repeat-find e.i. as suggested in bottom menu "Find (use SHIFT-F3 to repeat):" it does nothing. But when pressing Ctlr+G it works as expected. Finds that next search item (I do not know how to better describe.) |
||||
| matherp Guru Joined: 11/12/2012 Location: United KingdomPosts: 9129 |
Understood - will fix in next RC |
||||
javavi Senior Member Joined: 01/10/2023 Location: UkrainePosts: 218 |
Something went wrong with this command! If in version PicoMite V6.00.00RC4 it somehow worked (even large files were opened), then in version PicoMite V6.00.00RC5 (RP2040, RP2350) it gives an error even on very small files - Error: Out of memory |
||||
| matherp Guru Joined: 11/12/2012 Location: United KingdomPosts: 9129 |
I think the code is correct. Before it was probably trampling over memory. Please try my little test program Dim a%(5000) For i=0 To 5000:a%(i)=i:Next Input "File name: ",fname$ Edit File fname$ Print a%(222) |
||||
| javavi Senior Member Joined: 01/10/2023 Location: UkrainePosts: 218 |
PicoMite MMBasic Version 6.00.00RC5 Copyright 2011-2024 Geoff Graham Copyright 2016-2024 Peter Mather > files A:/ <DIR> . <DIR> .. 00:00 01-01-2000 4 bootcount 00:16 01-01-2000 75 test1.bas 00:16 01-01-2000 20 tested.bas 2 directories, 3 files, 15470592 bytes free > list Dim a%(5000) For i=0 To 5000:a%(i)=i:Next Input "File name: ",fname$ Edit File fname$ Print a%(222) > run File name: tested.bas [4] Edit File fname$ Error : Out of memory > |
||||
TassyJim Guru Joined: 07/08/2011 Location: AustraliaPosts: 6100 |
RUN [4] Edit File fname$ Error : Out of memory > I confirm the error. > OPTION LIST PicoMiteHDMI MMBasic Version 6.00.00RC5 OPTION FLASH SIZE 4194304 OPTION COLOURCODE ON OPTION KEYBOARD US OPTION CPUSPEED (KHz) 372000 OPTION DISPLAY 30, 80 OPTION RESOLUTION 1280x720 OPTION AUDIO GP26,GP27', ON PWM CHANNEL 5 OPTION DEFAULT FONT 3, 1 Jim VK7JH MMedit MMBasic Help |
||||
| matherp Guru Joined: 11/12/2012 Location: United KingdomPosts: 9129 |
Is this only on the a: drive? I tested on b: |
||||
| javavi Senior Member Joined: 01/10/2023 Location: UkrainePosts: 218 |
Yes, it looks like this error only occurs when trying to edit a file from drive A: |
||||
stanleyella Guru Joined: 25/06/2022 Location: United KingdomPosts: 2129 |
by default no display on monitor. had to use OPTION LCDPANEL CONSOLE 1, RGB(white) , RGB(black) handy reminder, if using mmcc as console select picovga if using hdmi or terminal won't work. PicoMiteHDMI MMBasic USB Version 6.00.00RC5 OPTION SERIAL CONSOLE COM2,GP8,GP9 OPTION AUTORUN ON OPTION FLASH SIZE 4194304 OPTION COLOURCODE ON OPTION KEYBOARD UK, 0, 0, 600, 150 OPTION CPUSPEED (KHz) 372000 OPTION DISPLAY 30, 80 OPTION HDMI PINS 1, 3, 7, 5 OPTION RESOLUTION 1280x720 OPTION SDCARD GP22, GP6, GP7, GP4 OPTION AUDIO GP26,GP27', ON PWM CHANNEL 5 OPTION MODBUFF ENABLE 192 |
||||
| Volhout Guru Joined: 05/03/2018 Location: NetherlandsPosts: 4247 |
@Peter, Since 2350 platforms have 4M+ flash, the A-drive has grown in size. Is it an option to increase the number of flash slots back to 4, 5 or 7 ? Or do you want to keep this consistent between 2040 and 2350 ? Regards, Volhout PicomiteVGA PETSCII ROBOTS |
||||
| matherp Guru Joined: 11/12/2012 Location: United KingdomPosts: 9129 |
V6.00.00RC6 PicoMiteRP2040V6.00.00RC6.zip PicoMiteRP2350V6.00.00RC6.zip Fixes EDIT FILE for a file on the A: drive Fixes SHIFT-F3 using a USB keyboard Solves an incompatibility between the RP2350 and VS1053 No: Without a lot of testing I can't be sure that there aren't any special cases associated with the library/flash slots. Other than any bugs still to be found I want to keep everything stable and move to a 6.00.00 release as soon as possible |
||||
| javavi Senior Member Joined: 01/10/2023 Location: UkrainePosts: 218 |
Can I ask you here, who posts the code on GitHub? https://github.com/UKTailwind/PicoMiteAllVersions It's just that it happens somehow out of sync with the posting of the next firmware versions here. And now the code has not been updated and remains on version RC5 |
||||
| matherp Guru Joined: 11/12/2012 Location: United KingdomPosts: 9129 |
Me: when I feel like it |
||||
| javavi Senior Member Joined: 01/10/2023 Location: UkrainePosts: 218 |
Then that explains everything :)) I just follow the changes in the code and compile the firmware from the source code for my breadboard. |
||||
| TassyJim Guru Joined: 07/08/2011 Location: AustraliaPosts: 6100 |
HDMI RC6 with PWM audio [2] Play mp3 f$, alldone Error : Not enough Heap memory > memory Program: 1K ( 1%) Program (6 lines) 179K (99%) Free Saved Variables: 16K (100%) Free RAM: 1K ( 0%) 3 Variables 80K (34%) General 147K (66%) Free > list Dim d, f$ = "A:/Bombora.mp3" Play mp3 f$, alldone Do : Loop Until Inkey$ = Chr$(27) Or d = 1 Sub alldone : d = 1 : End Sub Run "A:/FEpico.bas", f$ > It did play OK in RC5 I think I will only allow playing mp3 files with a VS1053 attached if it can be determined that the VS1053 is present without resorting to ON ERROR. Jim VK7JH MMedit MMBasic Help |
||||
| Page 6 of 25 |
|||||
 Print this page |
