 Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me. |
Forum Index : Microcontroller and PC projects : Photos
  Page 4 of 7   |
|||||
| Author | Message | ||||
CaptainBoing Guru  Joined: 07/09/2016 Location: United KingdomPosts: 2075 |
ah, yes.. the whole "invasion" thing people were quite cross with us! |
||||
Poppy Guru Joined: 25/07/2019 Location: GermanyPosts: 486 |
FEZ ME   Andre ... such a GURU? | ||||
NorbertJ Newbie  Joined: 29/06/2020 Location: GermanyPosts: 6 |
That's my wife and me on our trip to Greenland.  It all started with the Elektor Junior Computer... |
||||
| CaptainBoing Guru Joined: 07/09/2016 Location: United KingdomPosts: 2075 |
I have to be honest Norbert, your wife looks better prepared for Greenland than you do  Kind of like me when I was sent to Montreal in February for the first time... Trainers and a jacket simply don't cut it! I nearly died just walking to the office  (-28C is *cold*) |
||||
| NorbertJ Newbie Joined: 29/06/2020 Location: GermanyPosts: 6 |
To be honest CaptainBoing, I suppose that I got through it well because my 'orbit' seems to be a little bigger than hers... It all started with the Elektor Junior Computer... |
||||
| MauroXavier Guru Joined: 06/03/2016 Location: BrazilPosts: 303 |
When I was six years old... Programming in my first computer, a Brazilian MSX1 Sharp Hotbit:  Two years ago (not so different from now):  |
||||
| realbobele Newbie Joined: 09/07/2020 Location: GermanyPosts: 23 |
Hi guys. Thanks for letting me be part of the forum and hello to everyone. I am as new as I could be here, but I hope you allow me to say: Boy, this is an old mans place So I will fit quite well, I think: I´m here because for some time I followed anything Colour Maximite. When I was a kid I desperately tried to program my own games on my C64, but I never get any fun out of assembler. But I did find the perfect environment for my programming skills with AMOS on my Amiga later. So much fun. And the Colour Maximite 2 instantly reminds me of that: MM Basic, it´s technical features... I can´t wait to get it in my hands. I´m sure I will have several questions I will be able to discuss here and I hope I can contribute to the community in the near future. Greetings from Germany Boris |
||||
| lizby Guru Joined: 17/05/2016 Location: United StatesPosts: 3150 |
Welcome to the forum, Boris, and, hey, I like your antennae--you will indeed fit right in! PicoMite, Armmite F4, SensorKits, MMBasic Hardware, Games, etc. on fruitoftheshed |
||||
realmnm Newbie Joined: 07/07/2020 Location: AustraliaPosts: 34 |
Hi, I'm new here too, I found this site recently while looking for more information on the Color Maximite 2, and it looks like it has all sorts of other things that I am interested in as well. Here's a picture of me taken at the start of the year.  About me: I started down this rabbit hole in the early 80's with a Dick Smith System-80 (PMC-80). A friend introduced me to modifying it, including adding a Don-Mon, building our own RS232 ports, Double Density adapters etc. Basic programming, assembler programming, which led to my first job. Since then I've always liked to tinker with electronics, but software is my main speciality. Looking forward to having fun and tinkering with my CMM2. Martin This signature intentionally left blank. |
||||
bigmik Guru Joined: 20/06/2011 Location: AustraliaPosts: 2914 |
Hi Martin, Welcome to the forum... You weren’t involved with the airforce were you? I tinkered with double density boards for the system 80 and of course don mon fantastic util in only 300H bytes. By Don McKenzie. Regards Mik Mick's uMite Stuff can be found >>> HERE (Kindly hosted by Dontronics) <<< |
||||
| realmnm Newbie Joined: 07/07/2020 Location: AustraliaPosts: 34 |
Only in the picture above. Based on your picture of your last day at work, I think we have a workplace in common, that is where I have been employed for the last 15 years. Martin This signature intentionally left blank. |
||||
| darthvader Regular Member  Joined: 31/01/2020 Location: FrancePosts: 76 |
Hi , After some years around here , it's funny to finally see the face of all the members  So , i just take a pics from my old face and share it with you  @ Gizmo : Try to reactivate my original account please (darthmite). Theory is when we know everything but nothing work ... Practice is when everything work but no one know why ;) |
||||
Hark0 Newbie Joined: 02/07/2020 Location: SpainPosts: 31 |
10 REM Presentatcion Program for ZX-Spectrum / Timex Compatible 20 LET a$="Hi, my name is Jordi, I born in Barcelona in 1970" 20 LET b$="I Love all related to old computer things..." 30 LET c$="...and NOW I have a CMM2!!!" 40 CLS 50 BORDER 0: INK 7 60 PRINT a$+CHR$(13)+b$+CHR$(13)+c$+CHR$(13) 70 PRINT "Press Y for a litte SPAM... ;-)" 80 LET i$=INKEYS$ 90 IF i$="y" OR i$="Y" THEN GOTO 110 100 GOTO 80 110 CLS 120 PRINT "I are one of the ZX-Uno Team." 130 PRINT "We make a clone of ZX-Spectrum with a FPGA." 140 PRINT "Just search ZX-Uno or ZX-Uno RetroBarcelona" 150 PRINT "for more info about this open hardware/software project." 160 PRINT "Thanks!"  My real name, Jordi.  Our stand in RetroBarcelona event! ZX-UNO: ZX-Spectrum Clone with FPGA |
||||
| CaptainBoing Guru Joined: 07/09/2016 Location: United KingdomPosts: 2075 |
2 variable not found 80:1 Hello Jordi and welcome, bienvenido a TBS Edited 2020-07-31 06:31 by CaptainBoing |
||||
| Hark0 Newbie Joined: 02/07/2020 Location: SpainPosts: 31 |
Really the program have SOME bugs: - Two lines with 20 number. - Line 80 the command is INKEY$ ------ > Syntax error!!!! P.S. Start test CMM2 commands... Edited 2020-07-31 19:19 by Hark0 ZX-UNO: ZX-Spectrum Clone with FPGA |
||||
| MikeAlves Newbie Joined: 29/07/2020 Location: United StatesPosts: 16 |
Michael Alves, Plano, Texas, US High School Computer Science Teacher   |
||||
cletus3x Newbie Joined: 31/07/2020 Location: United StatesPosts: 17 |
Howdy from the Philly area. Wanted to stop in and introduce myself as a N00b. Love the project and received my CMM2 a few days ago from Circuit gizmos, thanks Rob. I am not a programmer by trade but a Sales Engineer for Splunk and look forward to hanging out here from time to time. -George  My son Georgie and myself. CMM2 Demos: Kit Cat Clock BCD Clock Video |
||||
PeteCotton Guru Joined: 13/08/2020 Location: CanadaPosts: 368 |
Hi, I'm new here, but I'm very excited about the CMM2, and will hopefully be able to make some positive contribution to this amazing group. Thanks for having me. Pete  I'm the one without hair. My floofball of an idiot dog actually knows very little about computers. |
||||
| chris Regular Member Joined: 24/08/2020 Location: United KingdomPosts: 56 |
Hello, I'm Chris. I just took the plunge and purchased a CMM2, in no small part due to the 8bitguy video. It'll probably take a few weeks before it arrives. I really like the idea of a machine where basic doesn't need to be compiled but it acts as if it is - and then some. I also like the constraints of the platform too.  Chris Edited 2020-08-25 16:55 by chris |
||||
| Seamus Newbie Joined: 18/08/2020 Location: United StatesPosts: 13 |
Good day. I've been reading the documentation, browsing the forum, and eagerly awaiting the arrival of my CMM-2 kit since I ordered it. I've been involved with computers and electronics since the late 1970s, and I'm looking forward to playing with both the software and hardware aspects of the computer. I don't have any good recent photos of myself, but here's one from last December.  [Insert clever signature here] |
||||
| Page 4 of 7 |
|||||
 Print this page |
