TheBackShed.com

Forum Index : Microcontroller and PC projects : PicoMite V6.00.00 release candidates - all versions

Page 22 of 22

Author

Message

TassyJim

Guru

Joined: 07/08/2011
Location: Australia
Posts: 6089

Posted: 10:49pm 18 Nov 2024

Copy link to clipboard

Print this post

What was wrong with leaving r as a long long int ?

if( ( ( ((r >> 8) & 0xff) + ((r >> 16) & 0xff) + ((r >> 24) & 0xff) + ((r >> 32) & 0xff) ) & 0xff) != (r & 0xff)) goto error_exit; // returning temperature

VK7JH
MMedit MMBasic Help

zeitfest
Guru

Joined: 31/07/2019
Location: Australia
Posts: 482

Posted: 10:58pm 18 Nov 2024

Copy link to clipboard

Print this post

Just something to watch out for - in some systems, bit shifting right does not necessarily set the most significant bit to 0.

TassyJim

Guru

Joined: 07/08/2011
Location: Australia
Posts: 6089

Posted: 12:48am 19 Nov 2024

Copy link to clipboard

Print this post

disco4now said We were here for the DHT22 in 2015 on the micromite.I think its a combination of Temp and Humid that causes an overflow when the adding the 4 bytes of data to calculate the checksum.

MM2: DHT22 Is there an issue?

Yes, that makes sense.
I changed my test to include the checksum before masking with &hFF
Whenever the checksum is over 255, MMBasic returns 1000

0000001001110101000000001011100000101111 303
18.4 62.9
1000 1000

0000001001000010000000001011011111111011 251
18.3 57.8
18.3 57.8

0000001000111001000000001011011111110010 242
18.3 56.9
18.3 56.9

0000001000110001000000001011011111101010 234
18.3 56.1
18.3 56.1

0000001000101100000000001011011111100101 229
18.3 55.6
18.3 55.6

0000001000100101000000001011011111011110 222
18.3 54.9
18.3 54.9

0000001110110101000000001011100101110001 369
18.5 94.9
1000 1000

0000001011011011000000001011100010010101 405
18.4 73.1
1000 1000

0000001011001101000000001011100010000111 391
18.4 71.7
1000 1000

0000001010100110000000001011100001100000 352
18.4 67.8
1000 1000

Jim

VK7JH
MMedit MMBasic Help

matherp
Guru

Joined: 11/12/2012
Location: United Kingdom
Posts: 9084

Posted: 08:33am 19 Nov 2024

Copy link to clipboard

Print this post

Jim

Can you print out the received data as bytes when it passes and when it fails then I can check what is happening and fix - thanks

TassyJim

Guru

Joined: 07/08/2011
Location: Australia
Posts: 6089

Posted: 09:00am 19 Nov 2024

Copy link to clipboard

Print this post

Having trouble getting many passes tonight.
5 bytes in order followed by calculated values then MMBasic output.

1 172 0 193 110 fail
19.3 42.8
1000 1000

1 170 0 192 107 fail
19.2 42.6
1000 1000

1 167 0 193 105 fail
19.3 42.3
1000 1000

1 181 0 192 118 fail
19.2 43.7
1000 1000

2 94 0 193 33 fail
19.3 60.6
1000 1000

1 238 0 193 176 fail
19.3 49.4
1000 1000

1 200 0 193 138 fail
19.3 45.6
1000 1000

1 187 0 193 125 fail
19.3 44.3
1000 1000

1 183 0 193 121 fail
19.3 43.9
1000 1000

1 176 0 193 114 fail
19.3 43.2
1000 1000

1 174 0 192 111 fail
19.2 43
1000 1000

2 122 0 194 62 fail
19.4 63.4
1000 1000

2 11 0 193 206 Pass
19.3 52.3
19.3 52.3

1 209 0 194 148 fail
19.4 46.5
1000 1000

1 187 0 193 125 fail
19.3 44.3
1000 1000

1 177 0 193 115 fail
19.3 43.3
1000 1000

2 216 0 194 156 fail
19.4 72.8
1000 1000

2 41 0 194 237 Pass
19.4 55.3
19.4 55.3

1 219 0 194 158 fail
19.4 47.5
1000 1000

1 194 0 194 133 fail
19.4 45
1000 1000

1 187 0 193 125 fail
19.3 44.3
1000 1000

1 184 0 194 123 fail
19.4 44
1000 1000

3 82 0 195 24 fail
19.5 85
1000 1000

2 18 0 195 215 Pass
19.5 53
19.5 53

1 211 0 194 150 fail
19.4 46.7
1000 1000

Assuming you do need the uint8_t stuff,
I added an extra pair of brackets to your code but not in a position to try it.

if( ( (uint8_t)(( ((r >> 8) & 0xff) + ((r >> 16) & 0xff) + ((r >> 24) & 0xff) + ((r >> 32) & 0xff) ) & 0xff) ) != (uint8_t)(r & 0xff)) goto error_exit;

Jim

VK7JH
MMedit MMBasic Help

stanleyella

Guru

Joined: 25/06/2022
Location: United Kingdom
Posts: 2108

Posted: 12:29am 20 Nov 2024

Copy link to clipboard

Print this post

math scale samples!(),239,samples!()'scale to 240 pixel height
changed to math scale samples!(),139,samples!()'scale to 140 pixel height
and it's the same, 239
PicoMiteVGA MMBasic USB Edition 6.00.00RC15
OPTION SERIAL CONSOLE COM2,GP8,GP9
OPTION AUTORUN ON
OPTION FLASH SIZE 4194304
OPTION COLOURCODE ON
OPTION KEYBOARD UK, 0, 0, 600, 150
OPTION CPUSPEED (KHz) 378000
OPTION DISPLAY 30, 53
OPTION SDCARD GP13, GP10, GP11, GP12
OPTION AUDIO GP0,GP1', ON PWM

phil99

Guru

Joined: 11/02/2018
Location: Australia
Posts: 2129

Posted: 02:13am 20 Nov 2024

Copy link to clipboard

Print this post

Jim and Peter
To help find the condition that causes the Humid error here is a DHT emulator that lets you set the values of the data bytes independently.
The variable q can be used to increment the bytes on each response.

' "DHT Test Emulator 01.bas"
'
SetPin GP1, DIn, pullup 'Diode A to GP1, K to GP0 3.3k to 3.3V and link to other Pico for Humid.

Dim integer a(83), b1, b2, b3, b4, b5, word, n, m, q=60

Do
Math Set 50, a() : a(0)=80 : a(1)=80

b1=q : b2=q : b3=q : b4=63
b5 = (b1+b2+b3+b4) And 255 'make checksum
word = (b1<<32) + (b2<<24) + (b3<<16) + (b4<<8) + b5
m=0 : Print Bin$(word,40)

For n=81 To 2 Step -2
a(n) = 26 + 44 * ((word >> m) And 1)
' Print n,m,a(n)
Inc m
Next

Print "Waiting to receive HUMID command (either type 0 or 1)"

Do While Pin(GP1) : Loop
Pin(GP0) = 1
SetPin GP0, DOut 'Diode K to gp0, A to GP1,
Do : Loop Until Pin(GP1)

Device BitStream GP0, 83, a()
Pin(gp0)=1
SetPin gp0, off
Inc q
Print "Sent "; b1, b2, b3, b4, b5
Loop
End

Saved 1035 bytes
0011110000111100001111000011111111110011
Waiting to receive HUMID command (either type 0 or 1)
Sent 60 60 60 63 243
0011110100111101001111010011111111110110
Waiting to receive HUMID command (either type 0 or 1)
Sent 61 61 61 63 246
0011111000111110001111100011111111111001
Waiting to receive HUMID command (either type 0 or 1)
Sent 62 62 62 63 249
0011111100111111001111110011111111111100
Waiting to receive HUMID command (either type 0 or 1)
Sent 63 63 63 63 252
0100000001000000010000000011111111111111
Waiting to receive HUMID command (either type 0 or 1)
Sent 64 64 64 63 255
0100000101000001010000010011111100000010
Waiting to receive HUMID command (either type 0 or 1)
Sent 65 65 65 63 2
0100001001000010010000100011111100000101
Waiting to receive HUMID command (either type 0 or 1)
Sent 66 66 66 63 5
0100001101000011010000110011111100001000
Waiting to receive HUMID command (either type 0 or 1)
Sent 67 67 67 63 8
0100010001000100010001000011111100001011
Waiting to receive HUMID command (either type 0 or 1)
Sent 68 68 68 63 11
0100010101000101010001010011111100001110
Waiting to receive HUMID command (either type 0 or 1)
Sent 69 69 69 63 14
0100011001000110010001100011111100010001
Waiting to receive HUMID command (either type 0 or 1)
>

and the response of Humid

> do :humid gp1,t,h,0 :? t,h :pause 1000 : loop
1542.3 1542
1567.9 1567.7
1619.1 1619.1
1644.7 1644.8
1000 1000
1000 1000
1000 1000
1000 1000
1000 1000
>

Edited 2024-11-20 12:16 by phil99

Footnote added 2024-11-20 13:43 by phil99
Any combination of bytes that causes the checksum to rollover to zero produces "1000 1000" so Gerry's diagnosis is correct.

Footnote added 2024-11-20 16:47 by phil99
A one pin version that doesn't need the diode or pullup resistor.
DHT Test Emulator 04.zip

phil99

Guru

Joined: 11/02/2018
Location: Australia
Posts: 2129

Posted: 03:06am 20 Nov 2024

Copy link to clipboard

Print this post

Stan, perhaps Math Window is what you need. Math Scale just multiplies the values by a constant. eg

> clear
> dim samples(24) : for n=0 to 24 : samples(n)=n : next : math v_print samples()
0.0000, 1.0000, 2.0000, 3.0000, 4.0000, 5.0000, 6.0000, 7.0000, 8.0000, 9.0000, 10.0000, 11.0000, 12.0000, 13.0000, 14.0000, 15.0000, 16.0000, 17.0000, 18.0000, 19.0000, 20.0000, 21.0000, 22.0000, 23.0000, 24.0000
> math scale samples(), 0.5, samples() : math v_print samples()
0.0000, 0.5000, 1.0000, 1.5000, 2.0000, 2.5000, 3.0000, 3.5000, 4.0000, 4.5000, 5.0000, 5.5000, 6.0000, 6.5000, 7.0000, 7.5000, 8.0000, 8.5000, 9.0000, 9.5000, 10.0000, 10.5000, 11.0000, 11.5000, 12.0000
>

> MATH WINDOW samples(), 0, 120, samples() :math v_print samples()
0.0000, 5.0000, 10.0000, 15.0000, 20.0000, 25.0000, 30.0000, 35.0000, 40.0000, 45.0000, 50.0000, 55.0000, 60.0000, 65.0000, 70.0000, 75.0000, 80.0000, 85.0000, 90.0000, 95.0000, 100.0000, 105.0000, 110.0000, 115.0000, 120.0000
>

Edited 2024-11-20 13:09 by phil99

TassyJim

Guru

Joined: 07/08/2011
Location: Australia
Posts: 6089

Posted: 06:11am 21 Nov 2024

Copy link to clipboard

Print this post

I do have a working tool-chain for MMBasic V5.07.08 so I added Peters line from RC15 to it and sure enough, the DHT22 call failed with any overflow.
I then changed to Peter's suggestion

if( ( (uint8_t)( ((r >> 8) & 0xff) + ((r >> 16) & 0xff) + ((r >> 24) & 0xff) + ((r >> 32) & 0xff) ) ) != (uint8_t)(r & 0xff)) goto error_exit;

and the DHT22 now works again.

I am not sure why the addition test is need when a similar one exists a few lines earlier, but there is much I don't understand...

Jim

VK7JH
MMedit MMBasic Help

GAVI
Newbie

Joined: 20/11/2024
Location: Italy
Posts: 3

Posted: 08:05am 21 Nov 2024

Copy link to clipboard

Print this post

Hi everyone, I have two problems:
1) with Raspberry YD-RP2040 everything seems to work but MMCC is unable to transfer files larger than 98k bytes.
the other Raspberries work fine.
2) the MSGBOX("a","b","c") function only works up to MMbasic 5.08, the versions I tried (6.00RC8 and RC15) return the error ERROR: INVALID CHARACTER
Thanks for the work you are doing.

Mixtel90

Guru

Joined: 05/10/2019
Location: United Kingdom
Posts: 6760

Posted: 10:38am 21 Nov 2024

Copy link to clipboard

Print this post

Hi Gavi,
Check the CPU speed that you are using for YD-RP2040. They won't run as fast as the Pico and strange things may happen. I've had them running at about 250MHz but no higher (they would run VGA). Apart from that the CPU is the same. It seems to be that the 16MB flash is too slow as the 4MB boards that are similar to the YD-RP2040 are ok.

Mick

Zilog Inside! nascom.info for Nascom & Gemini
Preliminary MMBasic docs & my PCB designs

GAVI
Newbie

Joined: 20/11/2024
Location: Italy
Posts: 3

Posted: 11:33am 21 Nov 2024

Copy link to clipboard

Print this post

Thanks for the reply, I'll try some more tests.
the problem of the MSGBOX function also occurs on Rasperry Pico.

phil99

Guru

Joined: 11/02/2018
Location: Australia
Posts: 2129

Posted: 11:34am 21 Nov 2024

Copy link to clipboard

Print this post

Tried the MsgBox() example in the 5.08 manual on 6.0RC15, standard PicoMite LCD.
At CPU speeds 133 to 400MHz:-

Error : Invalid character:
>

Edit
Same at 64MHz.
Edited 2024-11-21 22:04 by phil99

GAVI
Newbie

Joined: 20/11/2024
Location: Italy
Posts: 3

Posted: 02:12pm 21 Nov 2024

Copy link to clipboard

Print this post

hi phil99, if you try to install version 5.08 you will see that it works correctly

matherp
Guru

Joined: 11/12/2012
Location: United Kingdom
Posts: 9084

Posted: 02:21pm 21 Nov 2024

Copy link to clipboard

Print this post

V6.00.00RC16

Fixes the bugs

MSGBOX
HUMID for DHT22
Missing cursor in EDIT

PicoMiteRP2350V6.00.00RC16.zip

PicoMiteRP2040V6.00.00RC16.zip

Page 22 of 22

Print this page

To reply to this topic, you need to log in.