 Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me. |
Forum Index : Microcontroller and PC projects : Real programmers use machine code
  Page 2 of 2 |
|||||
| Author | Message | ||||
panky Guru  Joined: 02/10/2012 Location: AustraliaPosts: 1101 |
Hugh, My brother and I built an EDUC8 when it came out in early 70's and we still have it and it is still operational!!! Mounted in a home made case with the C&K toggle switches on the front. For those of you who don't know it, it was an 8 bit serial machine with an instruction set loosly based on the PDP 8i. Memory was a single Fairchild 256 bit x 1 static ram. We had lots of fun with it and it was the entree for both of us to a lifetime of electronics and computers. Doug. ... almost all of the Maximites, the MicromMites, the MM Extremes, the ArmMites, the PicoMite and loving it! |
||||
| shoebuckle Senior Member  Joined: 21/01/2012 Location: AustraliaPosts: 189 |
http://members.optusnet.com.au/hnmpb/educ8.htm shows my Educ8 around 1978. The case was never enclosed giving me access to the innards. I sold it when I bought a Trash80. Hugh |
||||
| Page 2 of 2 |
|||||
 Print this page |
