 Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me. |
Forum Index : Windmills : Old Dunlite Wind Generator
Page 1 of 4   |
|||||
| Author | Message | ||||
b351267 Newbie  Joined: 08/02/2010 Location: AustraliaPosts: 27 |
Can anybody help me identify the model and votage of my Dunlite Wind Generator. The only information I have is the serial number 10326, the field resistance 50 ohms and the armature resistance measured bettween the two brushes 13 ohms. I have had it for over 30 years and when I bought it I was told it was a 48 volt ex PMG (now called Telstra) but I would really like to confirm this before I try to put it into service. I think it coud be either a model L or M. I was even able to buy 3 brand new blades off Dunlite back in the 70's but they could not help me with any other information. I am hoping it is a 48 volt model. Don There is always a 'Plan B'. |
||||
Downwind Guru  Joined: 09/09/2009 Location: AustraliaPosts: 2333 |
Do you have a photo. There was a thread a few weeks ago on dunlite generators. One of the links posted there had some information Link here. Pete. Sometimes it just works |
||||
| b351267 Newbie Joined: 08/02/2010 Location: AustraliaPosts: 27 |
Don There is always a 'Plan B'. |
||||
| b351267 Newbie Joined: 08/02/2010 Location: AustraliaPosts: 27 |
Thanks for the quick reply, here is a picture, I have seen the link you mention but although it is a very good archive of information, it not help me indentify my machine. Don There is always a 'Plan B'. |
||||
Bergen Newbie Joined: 19/02/2008 Location: AustraliaPosts: 19 |
It is either a L or M. To tell, you need to work out the gear ratio to tell. I do have a copy of the manual if you want a photo copy. If it did come from PMG, it will most definitely be 48v. Other than running it, its not easy to tell the voltage otherwise. Wind powers my house |
||||
KarlJ Guru Joined: 19/05/2008 Location: AustraliaPosts: 1178 |
lets see the brand new blades from the 70's Luck favours the well prepared |
||||
| Notdemocracy Newbie Joined: 10/02/2010 Location: AustraliaPosts: 5 |
I also have a Dunlite Ex PMG Wind Generator. It is a 48 Volt unit but has 4 blades to it. It's History is that 22 years ago it was removed from the Telephone exchange that it powered (remote location, off the grid) and it fell damaging the blades. The entire unit was overhauled and a new set of blades was supplied as well as a new hub. I purchased this unit from a chap that was not on the grid and had purchased it 21 years ago with the intention of putting it up. He sold it to me 1 year ago when he connected to the grid. At that time he told me it was un-usual in that it had 4 blades and not 3. He also said there were a small number of 4 blade units made for lower wind areas. The generator looks like the one in the photo and it seems in excellent condition. If you want I can get the old Fluke out and make some measurements for comparison? |
||||
| b351267 Newbie Joined: 08/02/2010 Location: AustraliaPosts: 27 |
James, The gear ratio as near as I can tell is 3.5:1 Karl, Picture attached of the new blades as requested still in their wooden crate , they cost me $265.00 in 1980. John, Please give me the resistance measurments for the field windings and between the two brushes. I was really hoping someone would offer to to do this. Don There is always a 'Plan B'. |
||||
| b351267 Newbie Joined: 08/02/2010 Location: AustraliaPosts: 27 |
Picture of new Dunlite blades still in their wooden crate, Don There is always a 'Plan B'. |
||||
| Notdemocracy Newbie Joined: 10/02/2010 Location: AustraliaPosts: 5 |
Don, I took the cover off and measured only 1 ohm on the brushes in contact. I then lifted 1 brush and read 30 Ohms brush to brush. Measuring the red and black wires on the terminal block between the brushes (with both brushes in contact it read 30 Ohms. Any help to you? If you want me to make further readings just ask. |
||||
| KarlJ Guru Joined: 19/05/2008 Location: AustraliaPosts: 1178 |
wow, thats three ? dunlites in as many weeks we've uncovered, thats almost enough to have a convention! BTW Notdemocracy dare we ask how much? sound like a ripper find. Luck favours the well prepared |
||||
| Darren Newbie Joined: 13/07/2008 Location: AustraliaPosts: 20 |
Hi Don I have a old Dunlite as well that Iam giving a birthday to and I see you have some red bob weights in that crate. Could you do me a big favor and take some measurements of them Iam missing these parts. A weight would also be helpful. Thanks Darren |
||||
| neil0mac Senior Member  Joined: 26/12/2009 Location: AustraliaPosts: 210 |
Make it five! I had a friend in today with one he picked up in S.A a month or so ago - with a gearbox that 'weighs a ton'. Actually he was in Adelaide looking for a 'Hannan' (spelling?) wind generator that was designed by his grandfather. Anyone know one of these is available? The bloke who had a number of them down there sold them to someone in Vic not so long ago. |
||||
| neil0mac Senior Member Joined: 26/12/2009 Location: AustraliaPosts: 210 |
..... |
||||
| b351267 Newbie Joined: 08/02/2010 Location: AustraliaPosts: 27 |
Hello Darren, Attached a drawing of one of the bob weights, you will have to make a mould for the lead somehow. In return could you do some resistance measurments on your machine for me, please measure the field winding(s) resistance and also between the two brushes in contact with the commutator. Do you also know the model and voltage of your machine? 
Don There is always a 'Plan B'. |
||||
| Notdemocracy Newbie Joined: 10/02/2010 Location: AustraliaPosts: 5 |
Karlj. It cost me $210.00 on ebay and $100 in fuel to go get it. At the time there was not much interest as most people in the Far South Coast of NSW seem to have either 12 or 24 Volt Systems and the Windmill was strictly "pick up only". His loss, My gain. |
||||
| KarlJ Guru Joined: 19/05/2008 Location: AustraliaPosts: 1178 |
I'd make that a huge bargain! good work, lets see it in the air please. These treasures deserve better than the corner of the garage. Luck favours the well prepared |
||||
| Notdemocracy Newbie Joined: 10/02/2010 Location: AustraliaPosts: 5 |
Don. Just looked into my notes and I bought a 750 Watt unit so the readings might be out with regards to yours. A friend who looked at it said my unit was physically the same as the larger unit but with different windings and he said they were good for over 1 kw. (over engineered, I guess.) Keep going, with the units turning up you should get the answers you need. |
||||
| Notdemocracy Newbie Joined: 10/02/2010 Location: AustraliaPosts: 5 |
KarlJ. It will be a month or two before it goes up. Have Just installed A pole for it (large tree trunk and was very difficult for the backhoe that errected it). Was thinking on how to test it. I have a engine with a reduction gearbox and I figured if I put a pulley where the blade mount hub is (tapered shaft) I can run it and test it's output. Take a week or two before I do this but I'll post results if anyone is interested. John. |
||||
| KarlJ Guru Joined: 19/05/2008 Location: AustraliaPosts: 1178 |
yeah we're interested... nuts in fact Luck favours the well prepared |
||||
| Page 1 of 4 |
|||||
 Print this page |
