Home
JAQForum Ver 24.01
Log In or Join  
Active Topics
Local Time 13:46 28 Nov 2024 Privacy Policy
Jump to

Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.

Forum Index : Electronics : non polarised capacitors

Author Message
Tinker

Guru

Joined: 07/11/2007
Location: Australia
Posts: 1904
Posted: 10:40pm 26 Oct 2017
Copy link to clipboard 
Print this post

I found a bag of 10uF/50V non polarised electrolytic caps among the bits & pieces in my shed and wonder if these are OK for the filter caps on the IR2110's and for general 5V power line filtering?
Somebody mentioned tantalums are no good for that application and as I have not used non polarised electrolytics before I want to be sure.
They measured exactly 10.0uF and have a nice 105 deg C rating as well as being physically of similar size then the polarised 10uF/25V types.
Thanks
Klaus
 
oztules

Guru

Joined: 26/07/2007
Location: Australia
Posts: 1686
Posted: 02:16am 27 Oct 2017
Copy link to clipboard 
Print this post

non polarized are just two normal caps in series... ie two 20uf electro's in series... so should behave exactly the same chemically I would expect.


....oztules
Village idiot...or... just another hack out of his depth
 
Print this page


To reply to this topic, you need to log in.

© JAQ Software 2024