 Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me. |
Forum Index : Electronics : 6-15kW OzInverter, OzControl board.
| Author | Message | ||||
Clockmanfr Guru  Joined: 23/10/2015 Location: FrancePosts: 429 |
The 6kW - 15kW OzInverter. The OzControl board. And the list of components and parts required. PDF's are A4 size. I will do limited runs of double sided PCB boards:- The New 6-15kW Power Board, The New OzControl Board and the OzCooling Board. These 3 PCB's will be offered as an extra option with the Making a 6kW OzInverter Book. I will post Links to purchase very soon. 2016-06-03_104719_OzContrlBrdB3June16.pdf 2016-06-03_105614_PCBOzContrlBrdList1.pdf Everything is possible, just give me time. 3 HughP's 3.7m Wind T's (14 years). 5kW PV on 3 Trackers, (10 yrs). 21kW PV AC coupled SH GTI's. OzInverter created Grid. 1300ah 48v. |
||||
| Clockmanfr Guru Joined: 23/10/2015 Location: FrancePosts: 429 |
Sorry, these PDFs for the OzControl board, have now been superseded. There are now additional components for the sake of some domestic dwellings with particular types of Earthing and impedance issues. I will post a new PDF update shortly. Everything is possible, just give me time. 3 HughP's 3.7m Wind T's (14 years). 5kW PV on 3 Trackers, (10 yrs). 21kW PV AC coupled SH GTI's. OzInverter created Grid. 1300ah 48v. |
||||
| Clockmanfr Guru Joined: 23/10/2015 Location: FrancePosts: 429 |
As you can see on the OzControl Board No 8, there is now a small 220vac to 12vac 3w Isolation transformer, this is for the Voltage sense. Also modifications to the Voltage sense to make it a fine tune, board power on LED and connectors for off board LEDs. There is a double sided board, but these PDF's relate to a single side home Etch. 2016-06-07_105638_OzContrlBrd8Etch7thune16a.pdf 2016-06-07_105821_PCBOzContrlBrd8List.pdf Link to the Book and the PCB boards. http://www.echorenovate.com/new-book--make-a-6kw-inverter.php Everything is possible, just give me time. 3 HughP's 3.7m Wind T's (14 years). 5kW PV on 3 Trackers, (10 yrs). 21kW PV AC coupled SH GTI's. OzInverter created Grid. 1300ah 48v. |
||||
| joebog1 Senior Member  Joined: 07/11/2015 Location: AustraliaPosts: 114 |
I thank you gentlemen!! I shall keep you posted, BUT I have two weeks up the cape, building of all things, culverts for the new super highway to the the tip of Cape York. My technology is main frames, so to multi skill I learned to operate big cranes. Sorry I wander. I will be away for a few weeks, but I will keep you up to speed. Again!! my thanks for your patience and help Joe |
||||
 Print this page |
