Home
JAQForum Ver 24.01
Log In or Join  
Active Topics
Local Time 17:49 28 Nov 2024 Privacy Policy
Jump to

Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.

Forum Index : Electronics : Tractor batt., use of toroid for charging

Author Message
domwild
Guru

Joined: 16/12/2005
Location: Australia
Posts: 873
Posted: 01:27pm 16 Oct 2015
Copy link to clipboard 
Print this post

Hi,

My tractor battery of the Fiat 650 (65 HP) is surely suffering as I only have a 10A charger and I am not using it for six weeks at a time; batt. is 143Ahr and should probably be charged at more than 10A. Alternator can charge at 2200 RPM with about 600W. The batt. is old and I am trying to breath some life into it. The charger never switches off, even after all-night charging and stays at about 2Amps in the morning.

Q1.: Do I get bulk charging during driving as I am probably not getting enough Amps into the batt. from the 10A charger? But 600W/12V = 50 Amps, that does seem to be enough?

My free gift, the $1,500 Victron charger/inverter (24V/3000/70A - 16A) from the scrap yard seems to be dead but has two massive 14.6V/25A toroids, which I have removed.

Q2.: Is it possible to avoid having to buy a new batt. by adding a rectifier to the toroid and so building a cheap higher-Amp charger or is this most likely just one of my many crazy ideas?
Taxation as a means of achieving prosperity is like a man standing inside a bucket trying to lift himself up.

Winston Churchill
 
jdevine82
Newbie

Joined: 01/09/2016
Location: Australia
Posts: 13
Posted: 02:01am 02 Sep 2016
Copy link to clipboard 
Print this post

You can use a inverter welder as a charger. Just make sure you connect the electrodes to the battery before turning the welder on. You will need to manually watch it of course.
 
Print this page


To reply to this topic, you need to log in.

© JAQ Software 2024