Home
JAQForum Ver 24.01
Log In or Join  
Active Topics
Local Time 06:29 29 Nov 2024 Privacy Policy
Jump to

Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.

Forum Index : Electronics : Sola power conditioner-US??

Author Message
domwild
Guru

Joined: 16/12/2005
Location: Australia
Posts: 873
Posted: 01:46pm 07 Jul 2014
Copy link to clipboard 
Print this post

Input 240VAC, 3.47A NOM, Output 240VAC 3.12A, VA 750.

Contains a huge and heavy transformer with three windings and two large caps. The transformer is a special (lossy) trans. used in conditioners, name escapes me.

Measured input which is 240.2VAC and the output is 249VAC (?). Is this the reason why I managed to pick it up from somewhere many years back because it is stuffed? Put a small load on in the form of a table lamp and it still showed 249VAC.

As an aside: PCs many years back had power supplies built for an input of 220VAC with the result that they blew frequently.

Is this conditioner u/s and the caps might be the only salvageable item once I check them??
Taxation as a means of achieving prosperity is like a man standing inside a bucket trying to lift himself up.

Winston Churchill
 
Downwind

Guru

Joined: 09/09/2009
Location: Australia
Posts: 2333
Posted: 04:13am 08 Jul 2014
Copy link to clipboard 
Print this post

My guess is its 1:1 ratio isolation transformer, so 240VAC in and 240VAC out with some current loss in between.

A simple ohms test between primary and secondary windings should show if it has a fault.

Pete.
Sometimes it just works
 
domwild
Guru

Joined: 16/12/2005
Location: Australia
Posts: 873
Posted: 12:55pm 08 Jul 2014
Copy link to clipboard 
Print this post

Pete,

Thanks for that. Will check the windings as you are suggesting.
Taxation as a means of achieving prosperity is like a man standing inside a bucket trying to lift himself up.

Winston Churchill
 
Print this page


To reply to this topic, you need to log in.

© JAQ Software 2024