Home
JAQForum Ver 24.01
Log In or Join  
Active Topics
Local Time 09:37 26 Nov 2024 Privacy Policy
Jump to

Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.

Forum Index : Electronics : PD's  150V 45A MPPT

Author Message
pd--
Senior Member

Joined: 11/12/2020
Location: Australia
Posts: 122
Posted: 07:54am 17 May 2023
Copy link to clipboard 
Print this post

The charge controller is slowly taking shape
Im using a plastic case that was lying around with a hunk of aerosharp inverter heat sink bolted to the back.
Thers a slot cut into the back of the case for the fets to mount on the heat sink
and the controller and display mount on the door




The Electronics is coming together, After my early run in with a dud cpu
everything is running as expected.




Looks like il use an old aerosharp core for the choke.
 
Revlac

Guru

Joined: 31/12/2016
Location: Australia
Posts: 1024
Posted: 08:06am 17 May 2023
Copy link to clipboard 
Print this post

Very Good.
Cheers Aaron
Off The Grid
 
KeepIS

Guru

Joined: 13/10/2014
Location: Australia
Posts: 1679
Posted: 08:21am 17 May 2023
Copy link to clipboard 
Print this post

Yes, very nice, and thanks for posting the clear photos.

I was just today admiring the boards that I had ordered, this will be my next project, I have everything I need to get one going, but not before cleaning up the mess I've created with my last project.
.
It's all too hard.
Mike.
 
soudirector

Newbie

Joined: 14/05/2023
Location: Nigeria
Posts: 26
Posted: 09:04am 17 May 2023
Copy link to clipboard 
Print this post

  pd-- said  The charge controller is slowly taking shape
Im using a plastic case that was lying around with a hunk of aerosharp inverter heat sink bolted to the back.
Thers a slot cut into the back of the case for the fets to mount on the heat sink
and the controller and display mount on the door




The Electronics is coming together, After my early run in with a dud cpu
everything is running as expected.




Looks like il use an old aerosharp core for the choke.




If I may ask, what are the features of this MPPT? Also, can WIFI module be integrated in it where you can get the all readings display on your mobile phone?
how times flies
 
poida

Guru

Joined: 02/02/2017
Location: Australia
Posts: 1418
Posted: 09:27am 17 May 2023
Copy link to clipboard 
Print this post

soudirector:

no wifi and never will be.
The mppt software is designed to be simple and robust.

wifi is neither simple nor robust

If you examine the code you will see that another microcontroller (such as
a ESP32 based board with wifi) may obtain the mppt data via USB connection and serial
data.
eg. send "^" plus char(13) and you will receive the mppt's output Amps

I will not support any effort to program the ESP32 or others for external data access.
It will be up to those who want it to make it happen.
wronger than a phone book full of wrong phone numbers
 
Print this page


To reply to this topic, you need to log in.

© JAQ Software 2024