Home
JAQForum Ver 24.01
Log In or Join  
Active Topics
Local Time 14:44 27 Nov 2024 Privacy Policy
Jump to

Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.

Forum Index : Electronics : Fake 80amp mppt charge controller

Author Message
BenandAmber
Guru

Joined: 16/02/2019
Location: United States
Posts: 961
Posted: 07:34pm 23 Nov 2019
Copy link to clipboard 
Print this post












Curiosity got the best of me

I just had to take it apart

So all of you experts can pick it apart lol

All 15 mosfets are the same mt3205a
be warned i am good parrot but Dumber than a box of rocks
 
BenandAmber
Guru

Joined: 16/02/2019
Location: United States
Posts: 961
Posted: 07:41pm 23 Nov 2019
Copy link to clipboard 
Print this post


I purchased it off eBay it was on sale for around eighty bucks

I used it down at the bus for about a year

After that my buddy of mine used to it for about a year

The only real complaints I have are
not knowing the highest voltage solar panels that can be used
and it's a little bit complicated to program

I'm actually a little bit impressed with it

fake or not it doesn't really good job
be warned i am good parrot but Dumber than a box of rocks
 
Warpspeed
Guru

Joined: 09/08/2007
Location: Australia
Posts: 4406
Posted: 08:57pm 23 Nov 2019
Copy link to clipboard 
Print this post

The mosfets are rated for only 60v maximum, so that would probably be the highest open circuit panel voltage.
Cheers,  Tony.
 
Davo99
Guru

Joined: 03/06/2019
Location: Australia
Posts: 1578
Posted: 08:54am 25 Nov 2019
Copy link to clipboard 
Print this post

There are so many ripoffs on fleabay these days it's a joke. You can't trust the ratings on anything because they are are based on pure fantasy, greed and stupidity.
They play the  bigger the better number game and take it to ridiculous levels. I have seen 10 Ah 18650 batteries so many times and far as I'm aware, the name brand makers are pushing them to 3.5 ah so these Chinese sellers are full of it.

There are LOADS of PWM controllers listed as MPPT.  Price is a good indicator of their legitimacy but I have also seen sellers flogging controllers for $80 and $100 as MPPT when the exact same controller is being offered by most everyone else at around $20.

Not always a bad thing. I bought a couple listed as MPPT when I knew well the were PWN and then I complained to the seller and got a refund on the things. They want to rip people off knowingly then they are fair game I say.
Same as LED lights. Standard practice to over rate the hell out of those things.

I have a couple of 30 A mppt controllers and they are very good. Matched with the right voltage panels ( 30-32V) you don't loose much efficiency at all
 
BenandAmber
Guru

Joined: 16/02/2019
Location: United States
Posts: 961
Posted: 07:24pm 25 Nov 2019
Copy link to clipboard 
Print this post

I didn't even know what MPPT was when I bought that charge controller

A friend of mine had a couple of solar panels for sale and needed the money so I bought them

Later I realized I needed to charge controller

Bought the one above and it's been working ever since

It said it was 80 amps but I've only used it on 300 watts of solar so who knows

You are exactly right about the ratings on eBay
be warned i am good parrot but Dumber than a box of rocks
 
renewableMark

Guru

Joined: 09/12/2017
Location: Australia
Posts: 1678
Posted: 09:01pm 25 Nov 2019
Copy link to clipboard 
Print this post

  Davo99 said  
I have a couple of 30 A mppt controllers and they are very good. Matched with the right voltage panels ( 30-32V) you don't loose much efficiency at all


You have me puzzled there, what do you mean by that?
Cheers Caveman Mark
Off grid eastern Melb
 
BenandAmber
Guru

Joined: 16/02/2019
Location: United States
Posts: 961
Posted: 11:34pm 25 Nov 2019
Copy link to clipboard 
Print this post

It didn't make sense to me either I'm assuming he meant to put pwm
be warned i am good parrot but Dumber than a box of rocks
 
Davo99
Guru

Joined: 03/06/2019
Location: Australia
Posts: 1578
Posted: 02:09pm 27 Nov 2019
Copy link to clipboard 
Print this post

  BenandAmber said  It didn't make sense to me either I'm assuming he meant to put pwm


Yes, my Mistake, I did mean PWM.
Although the cheaper technology, being adjustable in the set points the controller I have work very well. They seem to be discontinued or face lifted as I can't see them on fleabay now.
 
Print this page


To reply to this topic, you need to log in.

© JAQ Software 2024