Home
JAQForum Ver 24.01
Log In or Join  
Active Topics
Local Time 09:02 25 Nov 2024 Privacy Policy
Jump to

Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.

Forum Index : Windmills : 3 Phase Voltage Quadrupler

Author Message
leftcliq
Regular Member

Joined: 21/07/2012
Location: Australia
Posts: 51
Posted: 01:15am 16 Dec 2015
Copy link to clipboard 
Print this post

Hi Guys,

Always a great forum.

I'm using a F and P smart drive motor and I am looking for a 3 phase voltage quadruler circuit. Has anyone had any experience with this motor and this type of circuit? I have been through the previous 42 page forum post but maybe a missed a page. I know this is an old issue and some of the images are missing.

Or is the bottom circuit on Gordons Cap Mod Circuit a voltage quadrupler circuit?

I would really appreciate any feedback or experience.

-Dale.




 
Gizmo

Admin Group

Joined: 05/06/2004
Location: Australia
Posts: 5078
Posted: 01:34am 16 Dec 2015
Copy link to clipboard 
Print this post

Hi Dale

Its a 3 phase voltage doubler, in parallel with a standard 3 phase rectifier.

I heard Gordon did experiment with triplers and quadruplers, but the gains are small, plus its a real mess of rectifiers and capacitors.

I use a doubler on my OEM windmill, similar AC frequency to a F&P, and happy with the results, especially in low winds.

Glenn
The best time to plant a tree was twenty years ago, the second best time is right now.
JAQ
 
leftcliq
Regular Member

Joined: 21/07/2012
Location: Australia
Posts: 51
Posted: 01:45am 16 Dec 2015
Copy link to clipboard 
Print this post

  Gizmo said   Hi Dale

Its a 3 phase voltage doubler, in parallel with a standard 3 phase rectifier.

I heard Gordon did experiment with triplers and quadruplers, but the gains are small, plus its a real mess of rectifiers and capacitors.

I use a doubler on my OEM windmill, similar AC frequency to a F&P, and happy with the results, especially in low winds.

Glenn


Hi Glenn,

Thanks for the response. I have a voltage tripler that works fine and I think it was Gordon's circuit.

Thanks for the voltage doubler in parallel with a 3 phase rectifier. Is the attached image what you are referring too: Sparweb

Thanks,
Dale.

 
leftcliq
Regular Member

Joined: 21/07/2012
Location: Australia
Posts: 51
Posted: 02:24am 20 Dec 2015
Copy link to clipboard 
Print this post

  leftcliq said  
  Gizmo said   Hi Dale

Its a 3 phase voltage doubler, in parallel with a standard 3 phase rectifier.

I heard Gordon did experiment with triplers and quadruplers, but the gains are small, plus its a real mess of rectifiers and capacitors.

I use a doubler on my OEM windmill, similar AC frequency to a F&P, and happy with the results, especially in low winds.

Glenn


Hi Glenn,

Thanks for the response. I have a voltage tripler that works fine and I think it was Gordon's circuit.

Thanks for the voltage doubler in parallel with a 3 phase rectifier. Is the attached image what you are referring too: [URL=http://www.sparweb.ca/Diary/Cap_Test/Gordons_Cap_Circuit_R14.gif]Sparweb[/URL]

Thanks,
Dale.



Hi Glenn,
Can you please let me know if the circuit I have a link to above is the quadrupler circuit?

Regards,
Dale.

 
Print this page


To reply to this topic, you need to log in.

© JAQ Software 2024