Home
JAQForum Ver 24.01
Log In or Join  
Active Topics
Local Time 21:53 24 Nov 2024 Privacy Policy
Jump to

Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.

Forum Index : Windmills : Advert-Oz Wind 2kW vs Exmork / Huaya 2kW

     Page 3 of 3    
Author Message
flc1
Senior Member

Joined: 20/11/2011
Location: New Zealand
Posts: 242
Posted: 08:55pm 02 Jan 2017
Copy link to clipboard 
Print this post

Phill, Where have I written flack about your blades??? nowhere, not on youtube, I said the diffrent outputs have nothing to do with blades,and that is correct.
I have simply stated what I saw with your youtube vid, an observation of the output of both turbines at same rpm,IM NOT TALKING ABOUT YOUR BLADES Phill, , they are as you say a proven design, thats why we ordered some. Fred
 
DaveP68

Senior Member

Joined: 25/11/2014
Location: New Zealand
Posts: 292
Posted: 09:04pm 02 Jan 2017
Copy link to clipboard 
Print this post

Hi Phill

I fully except your detailed description of your full setup, which goes a long way to explain our observations of what has been seen in the YouTube video.

This sort of thing goes both ways, so please give that one some deeper thought for future reference.

Lets leave it there, like you say.

DavidEdited by DaveP68 2017-01-04
There are realities if you do not accept, will lead to frustration because you will be spending time on wrong assumptions and the results cannot follow! The Dunning Kruger Effect :)
 
windySE
Newbie

Joined: 01/07/2019
Location: Romania
Posts: 11
Posted: 09:46am 02 Jul 2019
Copy link to clipboard 
Print this post

  briggsy said   Hi everyone,
I have a similar chinese turbine which I've had in the air for about 3 years now(in South Gippsland Victoria) For those earlier posts asking about the pivoting tail I've posted some video on youtube which shows the tail pivoting in high wind. There's also a couple of shots of the controller and inverter to show output.

http://youtu.be/wRKVbuPmc5w



Hi everyone,

Same Chinese turbine operating in the South-East of Romania for a few months now.

1.5 kw nominal power. I had to make the tail boom longer (about 50-60 cm longer) and I increased the surface of the tail vane in order to make it more stable and now produces over 2 kw of power in high winds:

https://www.youtube.com/watch?v=Hs94dYY6TsI&t=37s

and:

https://www.youtube.com/watch?v=r9c2xAdDKQc
 
     Page 3 of 3    
Print this page


To reply to this topic, you need to log in.

© JAQ Software 2024