Home
JAQForum Ver 24.01
Log In or Join  
Active Topics
Local Time 19:37 24 Nov 2024 Privacy Policy
Jump to

Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.

Forum Index : Windmills : Reduced core F&P

Author Message
Ayjay

Newbie

Joined: 16/08/2006
Location: Australia
Posts: 10
Posted: 09:16pm 02 Nov 2006
Copy link to clipboard 
Print this post

Hi has anybody tried making a reduced core F&P ? Looks like they would be ok for trickle charging @0.7watts pr RPM.Some info is available on the ecoinn website. Looks like you cut the 42 pole stator down to 3x12pole stators.I might have a go . Stay tuned
AJ
 
clarence
Regular Member

Joined: 27/10/2006
Location:
Posts: 63
Posted: 05:20am 03 Nov 2006
Copy link to clipboard 
Print this post

I never heard of that before. do you mean every 12 teeth, remove two teeth ect? I once thought of removing every second tooth, before the decogging solutions started appearing, but it was only a thought. I bet someone has tried it though.
 
davef
Guru

Joined: 14/05/2006
Location: New Zealand
Posts: 499
Posted: 09:01am 03 Nov 2006
Copy link to clipboard 
Print this post

I haven't . . . yet. There is article of interest called "Optimizing a Permanent Magnet Alternator for micro-hydro application" by Dr. Chalko. Use google.

As well as an interest in wind energy, I also want to put in a picohydro setup. I only have enough head and flow for about 100-300W, hence my interest in a reduced-core F&P.

Good luck!
 
Pt w/field Matt

Senior Member

Joined: 24/02/2006
Location: Australia
Posts: 105
Posted: 09:36am 03 Nov 2006
Copy link to clipboard 
Print this post

i use a 6 pole series star and 3 pole star on my exersize bike only because of 14.75 gearing i have on it,any more poles connected makes it to hard to push,ive found that 1mm stators work best in 12 and 24 volt modes with a output of 100 to 550 watts depending how hard i pedal.also tried .8 and .6mm stator but the 1mm seems able to get into the powerband easiest,hopes this helps someone
matt down south
 
Print this page


To reply to this topic, you need to log in.

© JAQ Software 2024