 Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me. |
Forum Index : PCB Manufacturing : DiY PCB
| Author | Message | ||||
bigmik Guru  Joined: 20/06/2011 Location: AustraliaPosts: 2916 |
Hi All, I often watch Bigclive.com video clips for some technical based entertainment.. I have just watched this DiY Security light Clip and I was amazed at the method Clive used to create what I consider excellent PCBs. The clip goes for about 43minutes but the PCB making is from about 6m30 to around the 18min mark.. Anyway I was quite impressed with this. Kind Regards, Mick Mick's uMite Stuff can be found >>> HERE (Kindly hosted by Dontronics) <<< |
||||
Chopperp Guru Joined: 03/01/2018 Location: AustraliaPosts: 1064 |
Certainly uses interesting methods. I'll need to watch the video a few more times to get used to his accent & try to understand what he says in places. Good idea just using a smaller piece of the expensive film taped to a sheet of paper. I've done a similar thing with photo paper that won't pull through the printer. Thanks. Brian ChopperP |
||||
 Print this page |
