 Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me. |
Forum Index : PCB Manufacturing : Diptrace pattern
| Author | Message | ||||
lew247 Guru  Joined: 23/12/2015 Location: United KingdomPosts: 1702 |
Does anyone have a mini USB B pattern for Diptrace please? Ideally one where the actual part number is available as well I've found out through experience, not all footprints are the same, you have to have the footprint for the actual socket you want to use This way I can order the correct usb socket to match the pattern |
||||
MicroBlocks Guru Joined: 12/05/2012 Location: ThailandPosts: 2209 |
Here is a Component/Pattern and 3d model. 2016-08-10_075644_Lew.zip Watch out! The 3d model is very, very close but the two pins on the front which connect the metal case to the pcb are a bit offset to the back. The pattern is correct and i have test fitted it. The pattern also has all the dimensions so you can check it with the part you are going to order. Microblocks. Build with logic. |
||||
| lew247 Guru Joined: 23/12/2015 Location: United KingdomPosts: 1702 |
Thanks Jean |
||||
 Print this page |
