 Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me. |
Forum Index : PCB Manufacturing : PCB assembly and manufacture suggestions
| Author | Message | ||||
| pcbrookie Newbie  Joined: 22/10/2018 Location: AustraliaPosts: 1 |
Hi, I recently put a small pcb project together and have had a company create the PCB gerber files for me. From here i don't know what step is next to get the PCB built. I'm an electrician and i would be ordering more and more over time. This is a hobby at the moment so i need a prototype to try out and see if its viable. Do you do this or know of anyone that does? it involves a 3G/4g GSM module, a battery back up ( I hope can be in built) and a sensor to detect power. I dont really know how the process works. Thanks! Phil |
||||
Chopperp Guru  Joined: 03/01/2018 Location: AustraliaPosts: 1064 |
Hi Phil, Welcome Checkout this post. It may help. Others may chime in with better advice  Here Brian ChopperP |
||||
bigmik Guru Joined: 20/06/2011 Location: AustraliaPosts: 2916 |
Hi Phil, I use Shenzhen2U.com Its $9.90US for PCBs upto 10cm x 10cm and you get 10 panels of each. Cheapa$$ postage to AUS is typically around $11US so it works out about $30Aus all up.. Expect about 1 month delivery though altough I have had 12 days and also about 6 weeks.. You can pay extra for expedited manufacture and delivery but that is up to you. Kind Regards, Mick Mick's uMite Stuff can be found >>> HERE (Kindly hosted by Dontronics) <<< |
||||
 Print this page |
