 Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me. |
Forum Index : Microcontroller and PC projects : MM basic current version
| Author | Message | ||||
| viscomjim Guru  Joined: 08/01/2014 Location: United StatesPosts: 925 |
Hi all, What is the current version of mm. 4b or 4c? If 4c, where can it be downloaded from? Thanks Jim |
||||
Juri74 Senior Member  Joined: 06/02/2012 Location: ItalyPosts: 162 |
Hello! current version is 4.4B useful links: http://mmbasic.com/downloads.html http://geoffg.net/maximite.html Regards Juri |
||||
Geoffg Guru Joined: 06/06/2011 Location: AustraliaPosts: 3194 |
There is a slightly updated version (V4.4C Beta 1) which you can download from this thread ( http://www.thebackshed.com/forum/forum_posts.asp?TID=6164&PN =3&TPN=2). It fixed two minor issues and despite being called a beta is quite stable (there is nothing experimental in it). My plan is to release V4.5 for the Maximite, Duinomite, etc at the same time as V4.5 for the Micromite is released . It will include a few features that were developed for the Micromite but nothing major. Geoff Geoff Graham - http://geoffg.net |
||||
elproducts Senior Member Joined: 19/06/2011 Location: United StatesPosts: 282 |
Will the I/O definitions be included for both? i.e. AIN, DOUT www.elproducts.com |
||||
| Geoffg Guru Joined: 06/06/2011 Location: AustraliaPosts: 3194 |
Yes, and the new names for the I2C and 1-Wire commands. Geoff Geoff Graham - http://geoffg.net |
||||
 Print this page |
