Home
JAQForum Ver 24.01
Log In or Join  
Active Topics
Local Time 15:33 28 Nov 2024 Privacy Policy
Jump to

Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.

Forum Index : Microcontroller and PC projects : TFT- Maximite

Author Message
Harald
Newbie

Joined: 14/12/2013
Location: Germany
Posts: 2
Posted: 02:09am 15 Dec 2013
Copy link to clipboard 
Print this post

Hi all,

I have a question about the "Buzzer" und the "REDLED" PIN.
Anybody know the "Basic" Number for those pins...

Many Thank


P.S.: Sorry for my bad English
 
paceman
Guru

Joined: 07/10/2011
Location: Australia
Posts: 1329
Posted: 03:33am 15 Dec 2013
Copy link to clipboard 
Print this post

Hello Harald,

There is a schematic at the following link: TFT-MM Schematic

Red LED (SC read/write) is on pin 94 of the chip - active when pulled to Gnd.
Buzzer is on pin 100 of the chip (MM pin D13) - active when high.

Greg
 
Geoffg

Guru

Joined: 06/06/2011
Location: Australia
Posts: 3194
Posted: 04:35am 15 Dec 2013
Copy link to clipboard 
Print this post

Neither has a pin number in MMBasic.

The buzzer can be controlled with the "TOUCH BEEP duration" command. The red LED indicates activity on the SD card and cannot be changed by a program.

GeoffEdited by Geoffg 2013-12-16
Geoff Graham - http://geoffg.net
 
Harald
Newbie

Joined: 14/12/2013
Location: Germany
Posts: 2
Posted: 07:14am 15 Dec 2013
Copy link to clipboard 
Print this post


Thanks for the Information and best Regards from Germany
 
Print this page


To reply to this topic, you need to log in.

© JAQ Software 2024