vk4tec
Senior Member
Joined: 24/03/2012
Location: AustraliaPosts: 239 |
| Posted: 02:18am 22 Nov 2012 |
 Copy link to clipboard |
 Print this post |
|
Open "COM3:4800,1024" As #1
' SIRF MOD-GPS commands
'Print #1,"$PSRF100,1,9600,8,1,0*0D" ' 9600 baud
'Print #1,"$PSRF100,1,4800,8,1,0*0E" ' 4800 baud
'print #1,"$PSRF100,1,19200,8,1,0*38" ' 19k2 baud
'Print #1,"$PSRF103,03,00,00,01*27" ' GPGSV OFF
'Print #1,"$PSRF103,02,00,00,01*26" ' GPGSA OFF
'Print #1,"$PSRF103,00,00,00,01*24" ' GPGGA OFF
'Print #1,"$PSRF103,00,00,01,01*25" ' GPGGA ON 1 Hz
'Print #1,"$PSRF103,00,00,02,01*26" ' GPGGA ON 2 Hz
Print #1,"$PSRF103,04,00,02,01*22" ' GPRMC ON 2 Hz
- Andrew VK4TEC -
Andrew Rich VK4TEC
www.tech-software.net |
Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.