 Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me. |
Forum Index : Microcontroller and PC projects : Update to Beginning Maximite
| Author | Message | ||||
CircuitGizmos Guru  Joined: 08/09/2011 Location: United StatesPosts: 1425 |
New version of Beginning Maximite that covers 4.0 and features for CGCOLORMAX1 is now available for download. http://www.circuitgizmos.com/files/begmax.pdf Micromites and Maximites! - Beginning Maximite |
||||
| CircuitGizmos Guru Joined: 08/09/2011 Location: United StatesPosts: 1425 |
Updated to 1.0 finally. This applies to the CGMMSTICK1 and CGCOLORMAX1 but also applies to the Original Maximite and the Colour Maximite. Please let me know if there are errors. I'm also open to suggestions. I hope that this becomes a go-to document for anyone interested in the Maximites. Micromites and Maximites! - Beginning Maximite |
||||
bigmik Guru Joined: 20/06/2011 Location: AustraliaPosts: 2914 |
One small one so far Under INPUT$ you have a missing $ sign.. INPUT$ (from file) INPUT( nbr, [#]fnbr ) Should be INPUT$ (from file) INPUT$( nbr, [#]fnbr ) Regards, Mick PS. Good Job Rob Mick's uMite Stuff can be found >>> HERE (Kindly hosted by Dontronics) <<< |
||||
| CircuitGizmos Guru Joined: 08/09/2011 Location: United StatesPosts: 1425 |
Thanks, Mick. I fixed the working copy that I have. I also fixed the INPUT # to have text rather than "see above". Micromites and Maximites! - Beginning Maximite |
||||
 Print this page |
