 Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me. |
Forum Index : Microcontroller and PC projects : ARM boards
| Author | Message | ||||
haiqu Senior Member  Joined: 30/07/2011 Location: AustraliaPosts: 152 |
There has been an LPC2016 ARM development board languishing in my junkbox for a few years, and yesterday I found a use for it. This site provides a free embedded Forth for them: MPEFORTH Click the "Free Downloads" link and look for a file called lpcforth.zip Contains a full Forth system with 125 page manual for all Philips LPC2xxx CPUs with at least 64k Flash and 16k RAM and cystal frequency of 10, 12, or 14.7456 MHz. I can verify this works. Rob unzip, strip, touch, finger, grep, mount, fsck, more, yes, fsck, fsck, fsck, umount, sleep |
||||
vasi Guru  Joined: 23/03/2007 Location: RomaniaPosts: 1697 |
Thanks for the link. Never programed in Forth but it may be useful some day. Vasi Hobbit name: Togo Toadfoot of Frogmorton Elvish name: Mablung Miriel Beyound Arduino Lang |
||||
| haiqu Senior Member Joined: 30/07/2011 Location: AustraliaPosts: 152 |
Lots of free tutorials and books online here: http://www.forth.com Rob unzip, strip, touch, finger, grep, mount, fsck, more, yes, fsck, fsck, fsck, umount, sleep |
||||
| vasi Guru Joined: 23/03/2007 Location: RomaniaPosts: 1697 |
Bookmarked, thanks! Vasi Hobbit name: Togo Toadfoot of Frogmorton Elvish name: Mablung Miriel Beyound Arduino Lang |
||||
 Print this page |
