Home
JAQForum Ver 24.01
Log In or Join  
Active Topics
Local Time 10:39 23 Nov 2024 Privacy Policy
Jump to

Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.

Forum Index : Microcontroller and PC projects : Maximite microSD Card Access

Author Message
donmck

Guru

Joined: 09/06/2011
Location: Australia
Posts: 1313
Posted: 08:19pm 29 Jul 2011
Copy link to clipboard 
Print this post

Maximite microSD Card Access

If I designed a Maximite board into a case using a microSD card, would it be necessary to have the card accessible from the front panel?

This would mean you would have to pull the case apart, and possibly even remove the PCB from the case, as the microSD card may be under the PCB. (on the solder side of the board).

I may not agree with doing this myself at this stage, but I would like to hear what others have to say.

I also realize that Geoff may in future, give the firmware the ability to not even need a card for a final application.

Cheers Don...
https://www.dontronics.com
 
jman

Guru

Joined: 12/06/2011
Location: New Zealand
Posts: 711
Posted: 09:42pm 29 Jul 2011
Copy link to clipboard 
Print this post

Hi Don

I never remove the card any way so I cant see this as been an issue
So I would say yip its all good


John
 
haiqu

Senior Member

Joined: 30/07/2011
Location: Australia
Posts: 152
Posted: 01:57am 30 Jul 2011
Copy link to clipboard 
Print this post

Hi Don,

For a totally embedded application this might be fine, but being able to take the card out to back up programs is a bonus in the general version. So I'd say "it depends".

Rob (patiently awaiting the board I just ordered on Friday!)
unzip, strip, touch, finger, grep, mount, fsck, more, yes, fsck, fsck, fsck, umount, sleep
 
donmck

Guru

Joined: 09/06/2011
Location: Australia
Posts: 1313
Posted: 02:19am 30 Jul 2011
Copy link to clipboard 
Print this post

  haiqu said   Hi Don,

For a totally embedded application this might be fine, but being able to take the card out to back up programs is a bonus in the general version. So I'd say "it depends".

Rob (patiently awaiting the board I just ordered on Friday!)


Thanks Rob,

We are looking at alternatives, and after kicking it around, we are starting to find them. Getting users opinions is valuable of course.

Re the order:
Altronics have on their web page currently:
Further production runs are scheduled for July & August delivery.

We should be shipping on Tuesday, and this could be followed up by 100 a week, for a number of weeks into the future. Well, this is what I have planned for.

Planning and actual facts can be two very different things.

Cheers Don...
https://www.dontronics.com
 
Keith @

Senior Member

Joined: 19/06/2011
Location: Australia
Posts: 167
Posted: 02:25am 30 Jul 2011
Copy link to clipboard 
Print this post

Hi Don

Think of it as an internal HDD in a desktop case instead of as a floppy drive. It is still accessible by software or screw driver.

Keith
The more we know, the more we know we don't know !
 
sparkey

Senior Member

Joined: 15/06/2011
Location: Australia
Posts: 819
Posted: 04:02am 30 Jul 2011
Copy link to clipboard 
Print this post

well u would not take your hard drive out unless you needed to
technicians do it with least resistance
 
Print this page


To reply to this topic, you need to log in.

© JAQ Software 2024