 Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me. |
Forum Index : Microcontroller and PC projects : Maximite now supports Arduino Shields.
| Author | Message | ||||
donmck Guru  Joined: 09/06/2011 Location: AustraliaPosts: 1313 |
Maximite now supports Arduino Shields. DonDuino Cross Board and kit of parts: http://www.dontronics-shop.com/the-donduino-cross.html Or blank board posted as a letter: http://www.dontronics-shop.com/donduino-cross-letter.html Cheers Don... https://www.dontronics.com |
||||
VK6MRG Guru Joined: 08/06/2011 Location: AustraliaPosts: 347 |
Don, Just looking at the Maximite EV and with the DonDuino Cross Board on it. Do the mounting holes on the DonDuino Cross Board line up with the Maximite EV's mounting holes? I'm trying to design a add-on board for the Maximite EV to have all the I/O stuff for the MAXI GATE project I’m working on. I had to redesign it to accommodate the mounting holes 
Now i have a blank PCB design with the mounting holes and the 26 pin connector already on it so when it comes time to design something else I have the basics done. Its easier to ask forgiveness than to seek permission! ............VK6MRG.............VK3MGR............ |
||||
| donmck Guru Joined: 09/06/2011 Location: AustraliaPosts: 1313 |
Hi Matthew, No the DonDuino Cross holes don't line up with the Maximite EV holes. The fixture relies entirely on the mating of the male header of the EV board, to the female header mounted underneath the Cross board. The just plug together. Cheers Don... https://www.dontronics.com |
||||
 Print this page |
