 Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me. |
Forum Index : Microcontroller and PC projects : Solution for DVI/HDMI problems
| Author | Message | ||||
homa Guru  Joined: 05/11/2021 Location: GermanyPosts: 351 |
Hi, my problem with HDMI output was not as bad as in this picture with one of the last FW versions: .jpg) https://www.thebackshed.com/forum/ViewTopic.php?TID=17229&P=1#226154 But my monitor (HP 2309m) also delivers with the > option list PicoMiteHDMI MMBasic Version 6.00.00RC3 OPTION FLASH SIZE 4194304 OPTION COLORCODE ON OPTION KEYBOARD GR OPTION CPUSPEED (KHz) 372000 OPTION DISPLAY 30, 80 OPTION HDMI PINS 1, 3, 7, 5 OPTION RESOLUTION 1280x720 OPTION SDCARD GP22, GP6, GP7, GP4 OPTION AUDIO GP26,GP27', ON PWM CHANNEL 5 OPTION MODBUFF ENABLE 192 OPTION PLATFORM OLIMEX OPTION DEFAULT FONT 3, 1 > no permanent image. A resync takes place every few seconds to minutes. Including slight crisping on the left edge. But I also wanted to use my HDMI matrix: https://www.thebackshed.com/forum/ViewTopic.php?TID=17173&P=6#225723 By the way, the HDMI/DVI signal only works with a direct connection to the monitor. Using an HDMI matrix (Greathtek 4x2) does not work. I bought this DVI switch: Aten CS1762A.  What can I say? It works better than expected. Not only can I use the DVI input from the monitor, I can also use the HDMI matrix! I found this device in a small ads. For a fraction of the new price and as unused goods.  I hope this can help someone. Matthias |
||||
stanleyella Guru Joined: 25/06/2022 Location: United KingdomPosts: 2111 |
OPTION RESOLUTION 1280x720? OPTION CPUSPEED (KHz) 372000? this works on car monitor hdmi > option list PicoMiteHDMI MMBasic Version 6.00.00RC2 OPTION AUTORUN ON OPTION FLASH SIZE 4194304 OPTION COLOURCODE ON OPTION KEYBOARD US OPTION CPUSPEED (KHz) 315000 OPTION DISPLAY 24, 80 OPTION HDMI PINS 1, 3, 7, 5 OPTION SDCARD GP22, GP6, GP7, GP4 OPTION AUDIO GP26,GP27', ON PWM CHANNEL 5 OPTION MODBUFF ENABLE 192 OPTION PLATFORM OLIMEX > Edited 2024-10-04 01:33 by stanleyella |
||||
 Print this page |
