 Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me. |
Forum Index : Microcontroller and PC projects : Anyone MPU6050
| Author | Message | ||||
| robarino Newbie  Joined: 15/03/2012 Location: SwedenPosts: 24 |
Hej I was wondering if anyone has interfaced the duinomite with the MPU6050 gyro. I have tried to use the I2c commands but I cannot seem to get it to work. If anyone has written the code let me know how you got it to work! Thanks! rob |
||||
bigmik Guru  Joined: 20/06/2011 Location: AustraliaPosts: 2914 |
Hi Rob, As no-one replied to you I decided to look into what the MPU6050 was. Whilst I cant help directly, Have a read of this article MPU6050 The first section mentions that SLEEP mode has to be disabled before you can read the registers. It also mentions it generates an interrupt to let you know to read the FiFo buffer. Sorry I cant be more helpful. Regards, Mick Mick's uMite Stuff can be found >>> HERE (Kindly hosted by Dontronics) <<< |
||||
 Print this page |
