 Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me. |
Forum Index : Microcontroller and PC projects : duinomite mmbasic old nokia phone AT com
| Author | Message | ||||
| LG046 Newbie  Joined: 02/08/2012 Location: NetherlandsPosts: 12 |
hi i have a old nokia phone that can work with AT commands using hyperterminal i can get it to call a number like this ATD=XXXXXXX ( xxx stand for the phone number ) now i have MMbasic on my duinomite mega and want to do the same when i do OPEN com4:9600 as console and type at the prompt ATD=xxxxxx and hit enter it works but when i do the following code its not working 10 cls 20 open "com4:9600" As #1 30 print #1, "ATD=xxxxx" 40 close #1 the phone is not calling the number.......... |
||||
| LG046 Newbie Joined: 02/08/2012 Location: NetherlandsPosts: 12 |
nobody? 31 views... maybe get the mod-gsm then..... would be nice to use the old cellphone is a Nokia 6310i with serial com cable. otherwise its going to be recycled and ofcourse for a mod-gsm i need to spent some money -( |
||||
| ajkw Senior Member  Joined: 29/06/2011 Location: AustraliaPosts: 290 |
Does the Nokia connection cable require drivers that the MM doesn't have? |
||||
jebz Regular Member  Joined: 13/06/2011 Location: AustraliaPosts: 79 |
Maybe it needs some handshaking or a pause between the characters. |
||||
Geoffg Guru  Joined: 06/06/2011 Location: AustraliaPosts: 3194 |
That just sets the variable ATD to xxxxxx but as the characters that you typed are echoed on the serial port (opened as console) your phone still gets the string terminated by a single carriage return. The PRINT command on line 30 adds a carriage return/line feed at the end. Is this what you want? Use the semicolon to suppress the CR/LF and chr$(13) to generate a single carriage return. Ie: 30 print #1, "ATD=xxxxx" chr$(13) ; Geoff Graham - http://geoffg.net |
||||
| LG046 Newbie Joined: 02/08/2012 Location: NetherlandsPosts: 12 |
hi thx i am now trying to send a text message out. i made some changes.. funny thing is i run the code and get a text message on my phone not only displaying the "example text" but also parts of the code hahaha and when i run it again , just run edited nothing its no longer working after a while i can run it again and then it sends out a sms txt again here is my code -- 10 Cls 15 Open "COM4:9600" As #1 16 Print #1, "AT" Chr$(13) : Pause 1000 17 Print #1, "AT+CVHU=0" Chr$(13) : Print #1, "at+cvhu" Chr$(13) : Pause 1000 20 Print #1, "AT+CMGF=1" Chr$(13) ; : Pause 1000 22 Print #1, "AT+CMGS=" : Pause 250 23 Print #1, Chr$(34) : Pause 250 24 Print #1, "XXXXXXXXX" : Pause 250 25 Print #1, Chr$(34) : Pause 250 26 Print #1, Chr$(13) : Pause 250 27 Print #1, "example text" : Pause 250 28 Print #1, Chr$(26) : Pause 250 23 Pause 1000 26 Print #1, "ath" Chr$(13) ; 27 Pause 1000 30 Close #1 EDIT made some changes --- 10 Cls 15 Open "COM4:9600" As #1 ' 16 Print #1, "AT" Chr$(13) ; : Pause 1000 ' 17 Print #1, "AT+CVHU=0" Chr$(13) : Print #1, "at+cvhu" Chr$(13) ; : Pause 250 20 Print #1, "AT+CMGF=1" ; : Pause 250 ' set sms to text mode 21 Print #1, Chr$(13) ; : Pause 250 22 Print #1, "AT+CMGS=" ; : Pause 250 'send sms 23 Print #1, Chr$(34) ; : Pause 250 24 Print #1, "xxxxxxxxxxxxxxxx" ; : Pause 250 'set phone number to send to 25 Print #1, Chr$(34) ; : Pause 250 26 Print #1, Chr$(13) ; : Pause 250 27 Print #1, "example text" ; : Pause 250 'text to send 28 Print #1, Chr$(26) ; : Pause 250 ' 23 Pause 1000 26 Print #1, "ath" Chr$(13) ; : Pause 250 'close any connections if not on hook ' 27 Pause 1000 30 Close #1 -- this works i also only get the example text now in my text message but when i run this command and its finisched i can not run it again.. i have to wait like minutes to be able to send a text message again..... |
||||
 Print this page |
