 Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me. |
Forum Index : Microcontroller and PC projects : (DM) Bytes left drv A on DuinoMite Mega?
  Page 2 of 2 |
|||||
| Author | Message | ||||
| DuinoMiteMegaAn Senior Member  Joined: 17/11/2011 Location: AustraliaPosts: 231 |
My Quote (above) #3. Someplace I read that you cannot have two consoles active
at the same time? You need to interlock the setup selections for U & C. Your Reply (above) "and you can have video / usb /and serial consoles all at the same time .. "
Geoff Graham From the Maximite User Manual Ver. 2.7 by Geoff Graham page 28
"Note that only one serial port can be opened "as console" at a time" @Ken Who is correct? If Geoff is correct then You need to interlock the "setup" selections for U & C. 
BTW ... Any new beta firmware update to test? |
||||
CircuitGizmos Guru  Joined: 08/09/2011 Location: United StatesPosts: 1425 |
Doesn't that mean that you cannot have two SERIAL consoles active simultaneously? You could have serial1, kbd/vgs, and usb. You could have serial2, kbd/vgs, and usb. Cannot have serial1, serial2. Right? Micromites and Maximites! - Beginning Maximite |
||||
ksdesigns Senior Member Joined: 25/06/2011 Location: United StatesPosts: 143 |
right you can only have 1 "serial" as console the usb and video don't count as serial devices . ken |
||||
| Page 2 of 2 |
|||||
 Print this page |
