Home
JAQForum Ver 24.01
Log In or Join  
Active Topics
Local Time 04:22 23 Nov 2024 Privacy Policy
Jump to

Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.

Forum Index : Microcontroller and PC projects : dx4100or amd133 socket 3 486

Author Message
sparkey

Senior Member

Joined: 15/06/2011
Location: Australia
Posts: 819
Posted: 10:00am 09 Jul 2011
Copy link to clipboard 
Print this post

does any body have one of either of these chips sitting in your junk box i am chaseing one willing to pay for it and freight regards sparkey
technicians do it with least resistance
 
ajkw
Senior Member

Joined: 29/06/2011
Location: Australia
Posts: 290
Posted: 10:32am 09 Jul 2011
Copy link to clipboard 
Print this post

Sparkey,
I am pretty/very sure I have a DX4 100 at home, maybe just maybe 2. I am away until Thursday next week however and I would be happy to check then if you haven't turned another up by then. I guess the big question is "what is it worth?" I may do some checking but perhaps you would like to make an offer. Freight is easy.
Regards,
Anthony.
 
sparkey

Senior Member

Joined: 15/06/2011
Location: Australia
Posts: 819
Posted: 10:39am 09 Jul 2011
Copy link to clipboard 
Print this post

i would be happy to send you a postal cheque foir twenty dollars
technicians do it with least resistance
 
ajkw
Senior Member

Joined: 29/06/2011
Location: Australia
Posts: 290
Posted: 12:36pm 09 Jul 2011
Copy link to clipboard 
Print this post

Sparkey,
Sounds fair. I will obviously confirm what I have when I get home and will let you know. As I said will be home on Thursday (this week coming up).
Cheers,
Anthony.
 
sparkey

Senior Member

Joined: 15/06/2011
Location: Australia
Posts: 819
Posted: 10:29pm 09 Jul 2011
Copy link to clipboard 
Print this post

i have one of the last 486 motherboards to come of the"mill"as it would be said it has onboard 4x pci slots running 128 meg of f/p ram 32 meg cirrius video um sata raid hdd card and i am abuot to get xp running on it it has also a 100/mb intel ethernet and i am building a dc power supply of mny batteryb bank to run it so i will be using this to inter connect with my maxi as well ...sparkey
just waiting for the cpu now.....
technicians do it with least resistance
 
sparkey

Senior Member

Joined: 15/06/2011
Location: Australia
Posts: 819
Posted: 09:24pm 11 Jul 2011
Copy link to clipboard 
Print this post

even a dx4 120 would be nice you can get them or a dx4 OD you can also get p 75 chips from amd that ran socket tree..there was some pretty rad gear around back then but it was worth big bucks noadays people thow them in the bin its a shame
regards sparkey...

also chasing any pci video cards with 32 meg of ram but a 16 meg would doo....Edited by sparkey 2011-07-13
technicians do it with least resistance
 
sparkey

Senior Member

Joined: 15/06/2011
Location: Australia
Posts: 819
Posted: 11:59pm 12 Jul 2011
Copy link to clipboard 
Print this post

thanks anthony for that pingenerator /settick program have it working on the cro atm will hook it up to my inverter later when i get round to it
technicians do it with least resistance
 
ajkw
Senior Member

Joined: 29/06/2011
Location: Australia
Posts: 290
Posted: 08:21am 15 Jul 2011
Copy link to clipboard 
Print this post

Sparkey,
I have a processor, it is a Intel DX4 100. I also had a AMD chip but it was at the bottom of a draw and the pins are bent and have broken when straightened. :-( . The Intel was mounted in a motherboard. The video card in that box is not PCI it is a VLB.

Glad to hear that the code is working ok.

Send me a private message with your postal address, I'll do the same.
Regards,
Anthony.
 
sparkey

Senior Member

Joined: 15/06/2011
Location: Australia
Posts: 819
Posted: 03:04pm 15 Jul 2011
Copy link to clipboard 
Print this post

have no idea how to do things on the web sorry here is my mobile num...0411367965
please call me regards brian....
technicians do it with least resistance
 
ajkw
Senior Member

Joined: 29/06/2011
Location: Australia
Posts: 290
Posted: 04:45am 16 Jul 2011
Copy link to clipboard 
Print this post

Sparkey,
I have sent you a PM. They are done within this forum. Scroll to the top of this page and in the list of menu options for the forum you will see

Private Messenger - 1 new message.

Click it!

Cheers,
Anthony.

 
Print this page


To reply to this topic, you need to log in.

© JAQ Software 2024