 Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me. |
Forum Index : Microcontroller and PC projects : I got aome JDY-41 to play with...
  Page 3 of 3 |
|||||
| Author | Message | ||||
| Volhout Guru  Joined: 05/03/2018 Location: NetherlandsPosts: 4222 |
This is quite informative for nRF24. It may also apply to other RF modules... nRF24 tips and tricks Volhout PicomiteVGA PETSCII ROBOTS |
||||
Mixtel90 Guru Joined: 05/10/2019 Location: United KingdomPosts: 6778 |
Yes, very interesting indeed. :) It really is a nice little module. Not that easy to get easy to understand info on how to use it without an Arduino library though. I've collected a bit of documentation. nrf24l01.zip I found the flow diagram in the Product Specification to be useful. ===================== Anyone for a breakout pcb?  ===================== There seems to be a micropython library for this module, . Edited 2024-11-09 03:04 by Mixtel90 Mick Zilog Inside! nascom.info for Nascom & Gemini Preliminary MMBasic docs & my PCB designs |
||||
TassyJim Guru Joined: 07/08/2011 Location: AustraliaPosts: 6097 |
This basic code is from Jan 2015. I don't know the author and can't remember if I ever tried it. nRF24L01.zip It's from the early days of the micromite II Jim VK7JH MMedit MMBasic Help |
||||
| Mixtel90 Guru Joined: 05/10/2019 Location: United KingdomPosts: 6778 |
Thanks Jim. That's something that I'd found previously (I think it's all there is for this board). Unfortunately I don't think the entire code is there, he seems to have been showing what he was working with. It's a very good start though and I used some of it in the routines I was writing. I may be wrong and it's all there, but if it is I don't understand enough of what's happening to figure it out. :) I put the code into 3 txt files, which are what I included in my zip. That was so I could chop it into sensible routines using Notepad. Mick Zilog Inside! nascom.info for Nascom & Gemini Preliminary MMBasic docs & my PCB designs |
||||
| Page 3 of 3 |
|||||
 Print this page |
