Home
JAQForum Ver 24.01
Log In or Join  
Active Topics
Local Time 15:39 25 Nov 2024 Privacy Policy
Jump to

Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.

Forum Index : Other Stuff : pelton wheel construction

Author Message
david b
Newbie

Joined: 30/01/2013
Location: United States
Posts: 2
Posted: 06:57pm 31 Jan 2013
Copy link to clipboard 
Print this post

Hello I am new on here. I have been doing some research on pelton wheels but there are some questions that I havent been able to find answers for. Is it possible to build a wheel with a motor (generator) attached to it if you dont know how much head you have to work with? What RPM do they work best at?

The reason I ask is I am a college student and I eventually plan on living off the grid once I get a house built.

I also plan on having a small machine shop. Is it possible to put a 3-phase motor on a water wheel? I plan to make it an overshot wheel with a cup size paddle on the wheel. How many CFM are required to do something like this? Is this the type of wheel I should use? Should I use a water wheel?

anything will help, I am just starting the thought process and trying to figure out how to do everything.

Thanks for the help
 
Downwind

Guru

Joined: 09/09/2009
Location: Australia
Posts: 2333
Posted: 02:22pm 01 Feb 2013
Copy link to clipboard 
Print this post

Perhaps this calculator might help.

http://www.powerspout.com/advanced-calculator/
Sometimes it just works
 
david b
Newbie

Joined: 30/01/2013
Location: United States
Posts: 2
Posted: 07:03pm 01 Feb 2013
Copy link to clipboard 
Print this post

Thank you that was exactly what I was looking for
 
Downwind

Guru

Joined: 09/09/2009
Location: Australia
Posts: 2333
Posted: 02:27am 02 Feb 2013
Copy link to clipboard 
Print this post

Dont be blinded by some calculator on a web site by the figures it spits out, in reality the actual power value will be way under whats quoted in a calculator.

Its nothing more than a guide and far from a bible to follow, you must remember to add a tool (the calculator) to sell a product, the results of it will always be on the high side of a perfect situation, mind you we never have that.

Pete.
Sometimes it just works
 
Print this page


To reply to this topic, you need to log in.

© JAQ Software 2024