TheBackShed.com

Home	JAQForum Ver 24.01
Log In or Join
Active Topics
Local Time 02:23 28 Nov 2024	Privacy Policy
Jump to

Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.

Forum Index : Other Stuff : a way to count rpm?

Author

Message

johnj
Newbie

Joined: 05/04/2008
Location: Denmark
Posts: 17

Posted: 07:47am 24 Sep 2009

Copy link to clipboard

Print this post

Instead of messing with bicycle computers and stuff, I thought why not paint stripes on the hub of the mill/whatever device you have, to get an idea of rpm.
I had these stripes, (are they stroboscopic?), on my old record player.
You could have a set of stripes for cut-in, and what ever you wish to know.

Anyone tried this? howto do it?

cheers, J

davef
Guru

Joined: 14/05/2006
Location: New Zealand
Posts: 499

Posted: 09:36am 24 Sep 2009

Copy link to clipboard

Print this post

The system you are talking about was to adjust the turntable speed to within a few percent of the correct speed.

Do a search on optical sensors like found in PC mice. Or slotted disc.

Good luck

MacGyver

Guru

Joined: 12/05/2009
Location: United States
Posts: 1329

Posted: 04:28am 10 Oct 2009

Copy link to clipboard

Print this post

I'm working on a blade-pitch system that actually allows the windmill to speed up instead of slow down. When it's done, I intend to paint one blade white so it can be tracked with a video camera. If you're interested in a windmill's rpm, maybe this will work for you as well.

Nothing difficult is ever easy!
Perhaps better stated in the words of Morgan Freeman,
"Where there is no struggle, there is no progress!"
Copeville, Texas

Print this page

To reply to this topic, you need to log in.