Home
JAQForum Ver 24.01
Log In or Join  
Active Topics
Local Time 22:42 21 Nov 2024 Privacy Policy
Jump to

Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.

Forum Index : Other Stuff : Has Australia become the latte State

Author Message
Bryan1

Guru

Joined: 22/02/2006
Location: Australia
Posts: 1343
Posted: 06:33am 09 Jul 2024
Copy link to clipboard 
Print this post

So decided to buy a new 6" 4 jaw chuck for my Wiler Toolroom Lathe and asked for a screw on back plate only to be told lathes now don't use that anymore so your not likely to find one

So went for a look on google and plenty there with a 30mm x 3.5 thread that suit a Hercus lathe but no 40mm ones. So duly rang them only to find they don't have any in stock from both mobs, so it does make one think one poor guy made a big batch of them 30mm ones and went under so the stock has all all been bought up for next to nothing then sold at a huge discount for a nice profit.

Well I'm now making a pattern and I do need to get down to the foundry to pickup the 6 cast shelves for my 1850 wood stove I'm restoring.

Now if one looks for something like a part or such and it's not from modern stuff forget it as this country has forgotten how to make things.

So like everything now if you do need something just make it yourself.

Regards Bryan
 
Print this page


To reply to this topic, you need to log in.

© JAQ Software 2024