Home
JAQForum Ver 24.01
Log In or Join  
Active Topics
Local Time 06:54 24 Nov 2024 Privacy Policy
Jump to

Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.

Forum Index : Solar : Getting bigger

Author Message
KarlJ

Guru

Joined: 19/05/2008
Location: Australia
Posts: 1178
Posted: 09:38am 24 Jul 2011
Copy link to clipboard 
Print this post

I have the roof
I'm in the right industry.....
why not!
http://forums.energymatters.com.au/resources/image/411

Still at 28 panels but by the end of the week it will be 40.
roughly 7.3kW for the sake of arguement.

Compromise is 2 strings of 12 panels on the 3000HF 1 string of 185W panels and the other of 180W panels.

I thought this was a better option than 190W panels as i'm already overpowering the inverters by a decent margin as we have a 5000W inverter limit over here in WA to get premium feed in tarrif.
Luck favours the well prepared
 
KarlJ

Guru

Joined: 19/05/2008
Location: Australia
Posts: 1178
Posted: 01:12am 31 Jul 2011
Copy link to clipboard 
Print this post

all done

I did go for the 180W Solarfuns, hand picked a dozen at 183W a pop so close enough to the ZNShine panels that were 185 +/- 5%, possibly even better!
Certainly much less expensive than the suntechs and I didnt need those extra watts in any case.

Quite an awesome array of panels even if I do say so myself...
Today the weather is miserable but still cracking 400W....
yesterday with some full sun, both inverters top out and crack in 5300W continuously.

not much clip but fluctuating within 50W of MAX for both. I think this will be idea as previously in summer in the full heat of the day the CMS units barely made 1900W with 2.6kW panels, hence 2180W continuous is realistic with 3KW panels on it.
similarly the 4.4kW X 0.75 on the 3000HF =3285W less efficiency losses of 5% = 3120W and it tapps out at 3080W. so close enough!


Edited by KarlJ 2011-08-01
Luck favours the well prepared
 
Barry T Coles

Senior Member

Joined: 30/07/2009
Location: Australia
Posts: 109
Posted: 01:18am 31 Jul 2011
Copy link to clipboard 
Print this post

No wonder it's getting cold up here in the north, your sucking up all the sun.
Impressive array Karl.

Cheers
Barry
I need to learn from the mistakes of others.
I dont have the time to make them all myself.
 
neil0mac
Senior Member

Joined: 26/12/2009
Location: Australia
Posts: 210
Posted: 01:39am 31 Jul 2011
Copy link to clipboard 
Print this post

  Barry T Coles said   you're sucking up all the sun.


What's next Karl? A granny flat - or large garage?

Incidentally, you don't expect the panels near the HWS to provide unwanted shade?
 
KarlJ

Guru

Joined: 19/05/2008
Location: Australia
Posts: 1178
Posted: 03:18am 31 Jul 2011
Copy link to clipboard 
Print this post

The ones behind dont get any shade and the one to the side will cop a little late in the evening but no real solution to that.
Lower on the roof = shading from elsewhere.
Luck favours the well prepared
 
KarlJ

Guru

Joined: 19/05/2008
Location: Australia
Posts: 1178
Posted: 11:03am 05 Aug 2011
Copy link to clipboard 
Print this post

today was a classic example of why overpowering is good.


awesome. This graph represents 4.38kW / 7.34kW array on the 3000HF.
its more overpowered than the CMS 2000 (the CMS runs out to 2350W as opposed to the SMA 3000HF which is all out of ideas at 3076W)

In total the whole system made 32 units today and fed 29 of those to the grid Edited by KarlJ 2011-08-06
Luck favours the well prepared
 
Tinker

Guru

Joined: 07/11/2007
Location: Australia
Posts: 1904
Posted: 12:33pm 05 Aug 2011
Copy link to clipboard 
Print this post

Hey Karl, do you know a source of reasonable priced solar panels in Perth? I think you are in the business and would be aware where the good deals are. I did look at ebay but the cheap panels all seem to be overseas...

Mine is a standalone solar system and I'm looking for 24v panels. I priced the Sunpower 238W panel at $1080ea from a Perth supplier. Its a very nice panel but I need two or more panels and the budget is not too flash
Klaus
 
KarlJ

Guru

Joined: 19/05/2008
Location: Australia
Posts: 1178
Posted: 07:51am 06 Aug 2011
Copy link to clipboard 
Print this post

come see me I have tons of Suntech 190W panels
call it $400 each.

or I have 180W Solarfuns for $380 each.

I went for the solarfuns as I didn't need another 120W and rule of thumb is string only performs as well as worst performing panel, all my other panels are a year old and were +/-5%, experience has now shown me that typically means they are -3%.
hence a good match to the 180W solarfuns.

I have REC 235W panels and for the ants pants, the beez kneez I have 235W Sanyo's which are awesome but ferociously expensive, hence if you have the space 2 solarfuns is a better buy.

Luck favours the well prepared
 
Tinker

Guru

Joined: 07/11/2007
Location: Australia
Posts: 1904
Posted: 01:14pm 06 Aug 2011
Copy link to clipboard 
Print this post

Thanks Karl, that price sounds a lot more to my liking. At that price I'll be looking at 4 x 190W Suntech panels and will send you a PM when I'm ready to get them. They are for the 2 solar trackers I'm building, I have one two axis tracker already but decided the design could be improved and am making two more. Only two panels per tracker are used to keep the wind profile low as they will be located on top of my shed roof.

Would it be possible to see the spec sheet and mounting hole details for the Suntech 190's?. I need to make the panel frames yet and set the thing up in the shed with a dummy load on it to do a year's accelerated tracking test (that takes about 10 days).

I really appreciate your offer, 4 more panels just about get me grid independent for my standalone system.

Klaus
 
KarlJ

Guru

Joined: 19/05/2008
Location: Australia
Posts: 1178
Posted: 09:43am 08 Aug 2011
Copy link to clipboard 
Print this post

STP-190-24AD+

spec sheet should be here http://www.energymatters.com.au/images/suntech/STP190S24Adpl us.pdf

dont think it has the dimensions you're after though...

forget the pm shoot me an email at work address karl.jensen(AT)apolloenergy.com.au

Luck favours the well prepared
 
NathanM

Newbie

Joined: 23/08/2011
Location: United States
Posts: 5
Posted: 06:27pm 22 Aug 2011
Copy link to clipboard 
Print this post

That's an impressive system you have there. I've only recently gotten interested in solar panels. I think I'll start a little smaller than that and as I learn more, get more.
Need San Francisco electrician
 
rgormley
Senior Member

Joined: 22/02/2006
Location: Australia
Posts: 245
Posted: 06:49am 05 Oct 2011
Copy link to clipboard 
Print this post

Hey karl

just wondering about the mounting details for your inverters

inside or outside mount?
ip rating?
any extra cooling forced air? temp controlled?
when would you do a capacitor bank change in the inverter?
would you tackle the cap change yourself?

sorry for the barrage of questions, give me an idea on my own setup

(IG30 outdoor unit but mounted in my garage with extra forced air cooling)
running 15 x 180watt in series



 
Print this page


To reply to this topic, you need to log in.

© JAQ Software 2024