TheBackShed.com

Home	JAQForum Ver 24.01
Log In or Join
Active Topics
Local Time 12:27 22 Nov 2024	Privacy Policy
Jump to

Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.

Forum Index : Solar : Sunny Boy Inverter

Author

Message

imsmooth

Senior Member

Joined: 07/02/2008
Location: United States
Posts: 214

Posted: 10:14pm 09 Mar 2008

Copy link to clipboard

Print this post

I have the new SunnyBoy 3300 grid tie inverter. Is there any way to modify it so it can put out a little more than 3300W?

I am expecting to get an answer that the unit is controlled by software burned onto the chips and there is nothing that I can do.

GWatPE

Senior Member

Joined: 01/09/2006
Location: Australia
Posts: 2127

Posted: 11:25pm 09 Mar 2008

Copy link to clipboard

Print this post

Hi jk,

You will find that the sunnyboy inverter LCD shows power supplied to the grid. My SB1700 max's out at 1710W to the grid. The unit dumps excess power to the heatsink until the temp shutdown activates and derates the array. Modifying the firmware outside allowed settings will void the warranty, and unless the max is exceeded regularly I would not bother trying to mod it. It would be better to reconfigure your system and possibly get another inverter.

I hope this helps.

cheers, Gordon.

become more energy aware

petanque don
Senior Member

Joined: 02/08/2006
Location: Australia
Posts: 212

Posted: 10:40pm 10 Mar 2008

Copy link to clipboard

Print this post

I will suggest most power electronics is limited by heat dissipation issues so by trying to get more power through the thing heat management will become critical.

This is unlikely to result in a appliance that is reliable and gives a long service life.

Print this page

To reply to this topic, you need to log in.