Home
JAQForum Ver 24.01
Log In or Join  
Active Topics
Local Time 01:43 25 Nov 2024 Privacy Policy
Jump to

Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.

Forum Index : Solar : flat mounting

Author Message
brucedownunder2
Guru

Joined: 14/09/2005
Location: Australia
Posts: 1548
Posted: 08:39pm 13 Dec 2016
Copy link to clipboard 
Print this post

I've a big wooden frame built with the house to serve as a pogoda /shade area on the northfacing side ,Say,7.5M x 3 M ,all 125mmx 50mm hardwood dressed timber and all bolted down to the house and deck..

I'm thinking of mounting my secondhand set of 6 175 watt panels on this frame -it's elevated , so easy to walk sit move around under it --used to have a grape vine growing all over it -too many possums shi--ing and too many carpet pythonds at grape time.

Anyhow flat is what I'm thinking of mounting ,, angled would be "not-so-nice a look from the street..

whats your thoughts -it gets sun all year round from about 9 to sundown ,no shade from trees,just not the direct facing to the sun as I would get if I elevated them..

Bruce
Bushboy
 
Grogster

Admin Group

Joined: 31/12/2012
Location: New Zealand
Posts: 9306
Posted: 10:56pm 13 Dec 2016
Copy link to clipboard 
Print this post

It was my understanding that the only real reason for elevating the panels if you are in a really sunny spot, is just to prevent water from pooling on the panels when it rains. Do you get much rain? If no, or practically never, I don't see that being a problem. I seem to remember that pooled water on the panels would cause a magnifying glass effect and possibly result in damage to the panel? Might be totally wrong on that, I just seem to remember reading that somewhere, but I am no solar expert by any interpretation of the words!
Smoke makes things work. When the smoke gets out, it stops!
 
Madness

Guru

Joined: 08/10/2011
Location: Australia
Posts: 2498
Posted: 11:25pm 13 Dec 2016
Copy link to clipboard 
Print this post

Flat panels give more power when you need it most when there is heavy cloud cover. I have one set of panels flat on a carport roof when the sun is shining brightly the ones at 26 degrees (my latitude) produce more power. But when you are struggling to get enough power the flat ones produce more power every time.
There are only 10 types of people in the world: those who understand binary, and those who don't.
 
Grogster

Admin Group

Joined: 31/12/2012
Location: New Zealand
Posts: 9306
Posted: 11:30pm 13 Dec 2016
Copy link to clipboard 
Print this post

Out of interest Madness, is there any truth in the water pooling idea I have heard about?
Smoke makes things work. When the smoke gets out, it stops!
 
Madness

Guru

Joined: 08/10/2011
Location: Australia
Posts: 2498
Posted: 11:45pm 13 Dec 2016
Copy link to clipboard 
Print this post

Not that I am aware of, only issue I have seen is the dust collects on them and does not wash off as easily. With dew the dust collects in spots until you get some rain to wash it off.
There are only 10 types of people in the world: those who understand binary, and those who don't.
 
Grogster

Admin Group

Joined: 31/12/2012
Location: New Zealand
Posts: 9306
Posted: 11:53pm 13 Dec 2016
Copy link to clipboard 
Print this post

Okey dokey, thanks.
Smoke makes things work. When the smoke gets out, it stops!
 
Warpspeed
Guru

Joined: 09/08/2007
Location: Australia
Posts: 4406
Posted: 12:09pm 21 Dec 2016
Copy link to clipboard 
Print this post

I have some panels mounted with 20 degree slope, and agree with Madness, they will work better than anything else in dull grey full cloud cover.
They are also pretty terrific in the summer months when the sun is really high in the sky.

As long as you have some small slope, and every roof has.... water should not collect.
Try and deliberately direct rainwater onto the panels from the main roof of the house, so when it rains, the horizontal panels get a really good sluice down with water.

That can be important for washing off stubborn baked hard bird crap, dead leaves or anything else nasty that might stick to your panels.


Cheers,  Tony.
 
Madness

Guru

Joined: 08/10/2011
Location: Australia
Posts: 2498
Posted: 12:15pm 21 Dec 2016
Copy link to clipboard 
Print this post

A bucket of water with a soft broom will get most stuff off if you do it in the morning while there is still dew on the panels.
There are only 10 types of people in the world: those who understand binary, and those who don't.
 
Warpspeed
Guru

Joined: 09/08/2007
Location: Australia
Posts: 4406
Posted: 12:27pm 21 Dec 2016
Copy link to clipboard 
Print this post

True, but its one less thing I would rather not have to do on a routine basis.
Cheers,  Tony.
 
Print this page


To reply to this topic, you need to log in.

© JAQ Software 2024